Need to know where to buy two flanges for my T3
11-03-2003, 05:14 PM
#1
0.5 BAR
Thread Starter
Join Date: Oct 2003
Posts: 71
Need to know where to buy two flanges for my T3
I recently bought a Airesearch M10 (T3 .42/.4
off of the classifieds section on this forum. First off, I have a Tial wastegate that I'm going to be using so I took off the internal wastegate that came on the turbo. Also, I'm not going to be using the exhaust housing that came on the turbo so I need one of those 5-bolt flanges that blockes off the wastegate port (if they exist? otherwise how should I do this?).
Also, I need one of the triangular-looking 3-bolt flanges for the air intake on the compressor side.
I've looked around on the classifieds here, and some other places and havent been able to locate either of these items.
If someone could give me some insight on how to go about NOT using the internal wastegate, and blocking off the hole, and where to purchase these two flanges I need, I'd be very greatful
Thanks =D
off of the classifieds section on this forum. First off, I have a Tial wastegate that I'm going to be using so I took off the internal wastegate that came on the turbo. Also, I'm not going to be using the exhaust housing that came on the turbo so I need one of those 5-bolt flanges that blockes off the wastegate port (if they exist? otherwise how should I do this?). Also, I need one of the triangular-looking 3-bolt flanges for the air intake on the compressor side.
I've looked around on the classifieds here, and some other places and havent been able to locate either of these items.
If someone could give me some insight on how to go about NOT using the internal wastegate, and blocking off the hole, and where to purchase these two flanges I need, I'd be very greatful
Thanks =D
11-03-2003, 06:53 PM
#2
1.0 BAR
Join Date: Jan 2003
Posts: 438
Re:Need to know where to buy two flanges for my T3
Your pretty much on the money with that. Cheapturbo.com is where I bought my blockoff flange.
About the inlet flange, well, my compressor had a clamp on filter housing so i can't help you there...!
About the inlet flange, well, my compressor had a clamp on filter housing so i can't help you there...!
11-04-2003, 04:41 PM
#3
0.0 BAR
Join Date: Nov 2003
Posts: 30
11-13-2003, 08:11 PM
#4
0.0 BAR
Join Date: Nov 2003
Posts: 7
Re:Need to know where to buy two flanges for my T3
hey be carefull with that air research i have found the hard way that there are at least 2 diff 5 bolt flange hole patterns. the air research swingvalve that i have is diff pattern from the one pictured on cheap turbos.com. they list one thats a Ford style. HTH
Thread
Thread Starter
Forum
Replies
Last Post
99redek
Turbo Parts For Sale
1
04-13-2008 10:13 PM
gon3r
General Discussion
33
08-09-2007 10:53 PM
slow90hatch
Turbo Parts For Sale
5
02-19-2007 09:02 PM
