Need to know where to buy two flanges for my T3
 

I recently bought a Airesearch M10 (T3 .42/.48) off of the classifieds section on this forum. First off, I have a Tial wastegate that I'm going to be using so I took off the internal wastegate that came on the turbo. Also, I'm not going to be using the exhaust housing that came on the turbo so I need one of those 5-bolt flanges that blockes off the wastegate port (if they exist? otherwise how should I do this?).
Also, I need one of the triangular-looking 3-bolt flanges for the air intake on the compressor side.
I've looked around on the classifieds here, and some other places and havent been able to locate either of these items.

If someone could give me some insight on how to go about NOT using the internal wastegate, and blocking off the hole, and where to purchase these two flanges I need, I'd be very greatful :):):)

Thanks =D

Re:Need to know where to buy two flanges for my T3
 

Your pretty much on the money with that. Cheapturbo.com is where I bought my blockoff flange.

About the inlet flange, well, my compressor had a clamp on filter housing so i can't help you there...!

Re:Need to know where to buy two flanges for my T3
 

Re:Need to know where to buy two flanges for my T3
 

hey be carefull with that air research i have found the hard way that there are at least 2 diff 5 bolt flange hole patterns. the air research swingvalve that i have is diff pattern from the one pictured on cheap turbos.com. they list one thats a Ford style. HTH