HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   My turbo CRX at the drags tonight. (now with ripper vids further down the page) (https://www.homemadeturbo.com/forced-induction-7/my-turbo-crx-drags-tonight-now-ripper-vids-further-down-page-94277/)

QwikCRX 08-09-2008 01:22 AM

My turbo CRX at the drags tonight. (now with ripper vids further down the page)
 
3 Attachment(s)
I know most of you dont know me or my car so i will give you a basic run down of it, its a pretty simple no fills build, its a 1990 CRX si with a d16z6 with scat rods and SRP pistons using a custom manifold to run a big 16g turbo, the turbo is ported out to hold a 20 compressor wheel, the injectors are 750s and the management is hondata, the rest of the motor is all OEM. my pipes are all very small only 2- 2.25 inch and my exhaust is also very small and uses a muffler not a fart can. my main goal was 12s and 35+ mpg as this is my daily driver and has full interior and stereo system, GPS navigation and satellite radio, you get the idea. any way after upgrading my old 16G to this one i found that my 22 inch slicks became useless and i normally just spun my way to a average of 12.0 to 12.1 passes at best. but tonight i went to the track with my new 23s and got to make 3 passes trying different boost and tire pressures before it rained. each time shot i was getting faster and faster do to lowering the tire pressure and rasing the boost off the line. I really think had i got another handful of passes in i could have done even better. if i beat the snot out of it and hammered the tranny when i shifted i could get more out of it to but its my good car and i need it for work so i drive it pretty easy. any way here is the only video my wife took from tonight its my first pass when i only used 3 psi of boost to launch and 10 psi in the slicks, it was my worse pass of the night, and here is my best time slip of th enight as well. i think it will settle out around a high 11.5 to mid 11.6 once i get the ideal settings sorted out.
http://www.youtube.com/watch?v=LWc6SrKIIJ4
Attachment 15755
Attachment 15756
Attachment 15757

drupie51013 08-09-2008 01:55 AM

Re: My turbo CRX at the drags tonight.
 
:6 kool

onlyflash944 08-09-2008 03:18 AM

Re: My turbo CRX at the drags tonight.
 
what tranny?

LSD?

enikolayev 08-09-2008 03:22 AM

Re: My turbo CRX at the drags tonight.
 
How much boost are you running on there?

QwikCRX 08-09-2008 11:36 AM

Re: My turbo CRX at the drags tonight.
 
I have 2 trannys for the car, both are Si cable trannys, the only deifference is i have a HF 5th gear in one of them for lower rpms on the highway. and yes i have a helical style LSD.
The car is tuned to 22 psi, but as you know weather and temps can affect how much you make at any given setting of the boost controller, i was making between 20 and 21 last night.
thanks for looking in guys :)

Mo0se 08-09-2008 11:53 AM

Re: My turbo CRX at the drags tonight.
 
very clean, and plenty quick. I like it. :6

seerex 08-09-2008 01:35 PM

Re: My turbo CRX at the drags tonight.
 
Clean + quick= I like a lot :6

enikolayev 08-09-2008 04:29 PM

Re: My turbo CRX at the drags tonight.
 
That's utter sicness

rosario4124 08-09-2008 05:49 PM

Re: My turbo CRX at the drags tonight.
 
sweet :6

JonDouglas 08-09-2008 05:58 PM

Re: My turbo CRX at the drags tonight.
 
Awesome. I want a turbo D. One day, one day.

Lol, I spy a SHO in the background. :P

QwikCRX 08-09-2008 06:35 PM

Re: My turbo CRX at the drags tonight.
 
thanks guys , look closer there are 2 SHOs in that pic :)

D16Y8-Z6 08-09-2008 08:25 PM

Re: My turbo CRX at the drags tonight.
 
Glad to see the 23's worked out.

More seat time will get you down a bit.

Good stuff.

enikolayev 08-09-2008 11:08 PM

Re: My turbo CRX at the drags tonight.
 
how much are 23" slicks anyway?

-SKUM- 08-10-2008 02:10 AM

Re: My turbo CRX at the drags tonight.
 
what the ---- were yhou racing that got a 3.3 60'? must have been a bike.....lol



O by the way nice car, whats your lanch rpms with the slicks?????

Budget_SI 08-10-2008 02:20 AM

Re: My turbo CRX at the drags tonight.
 
awesome crx man! >:D

LilWayne 08-10-2008 02:54 AM

Re: My turbo CRX at the drags tonight.
 
niggity nice O0

turbo4life 08-10-2008 06:25 AM

Re: My turbo CRX at the drags tonight.
 
sick sick scik i love the charge pipes is that SEXY SS

QwikCRX 08-10-2008 11:54 AM

Re: My turbo CRX at the drags tonight.
 
thanks for looking in guys, The launch RPM is currently 5500. I only got to make 3 passes so im still playing with launch settings and tire pressure.

-SKUM- 08-10-2008 12:51 PM

Re: My turbo CRX at the drags tonight.
 
what were your tires psi???

hard2obtain 08-10-2008 04:04 PM

Re: My turbo CRX at the drags tonight.
 
I wish someday my CRX can go as fast as yours :8

QwikCRX 08-10-2008 04:05 PM

Re: My turbo CRX at the drags tonight.
 
around 8 for that time slip, i think if i go to 7.5 maybe 7 i will get a 1.6 60 ft. i started at 10 then 9 and then 8 and each time it kept getting a better 60ft, so i will just keep lowering slowly until i find its optimal PSI. with my 22s the optimal psi was 8 any lower and i was on the rim any higher and i spun badly.

JonDouglas 08-10-2008 11:33 PM

Re: My turbo CRX at the drags tonight.
 

Originally Posted by QwikCRX
thanks guys , look closer there are 2 SHOs in that pic :)

Lol. I missed the first gen in the back.

:P

drunkinmaster1 08-11-2008 12:01 AM

Re: My turbo CRX at the drags tonight.
 
pretty quick there. whats your complete setup consist of?

QwikCRX 08-11-2008 12:22 PM

Re: My turbo CRX at the drags tonight.
 
complete set up huh? well its a D16zc block and a d16z6 head, scat rods and srp pistons ARP studs and cometic gasket the rest of the motor is bone stock with all OEM honda gaskets and bearings. for fuel delivery i use precision 750s and a walboro 255 with a AEM regulator on stock fuel rail and lines. the turbo set up is made up of hand made pipes and manifold and a bar and plate intercooler thats small enough to fit behind my cover with no cutting. the turbo is a DSM big 16g ported and cut to house a 20g compressor wheel. my exhaust starts with a stock DSM o2 housing ported from 1 7/8 to around 2.25 my exhaust pipes are between 2.25 and 2.5 inches using the stock routing and a greddy muffler. my boost is controlled by a aem tru boost and my management is hondata s300 my tranny is a 90 si cable tranny with a obx lsd, my cars suspension is skunk2 coilovers and explicit speed traction bars. the car is full weight with a stereo system and all the stuff a daily driver would have including satellite radio GPS navigation ect ect. i havnt weighed it but i am sure its pretty heavy i would guess over 2200 with out me in it. over all its a very basic motor with no head work or anything any one could easily duplicate this motor for very cheap.

b18. 08-11-2008 12:28 PM

Re: My turbo CRX at the drags tonight.
 

Originally Posted by QwikCRX
D16zc

You have achieved General Tso's status.

You need a mini-LS.

QwikCRX 08-11-2008 12:32 PM

Re: My turbo CRX at the drags tonight.
 
Here are some ripper vids for you all

me verses srt4 neon
http://www.youtube.com/watch?v=1loWHtf8Fxg

me verses 5.0 mustang on street tires
http://www.youtube.com/watch?v=0pt9zO1frso

me verses honda s2000 i miss 3rd and just go into 4th the rest the track.
http://www.youtube.com/watch?v=7Zvugzl2HvI

in car cam of me bracket racing a hatch with some swap, i lift to avoid running under my 12.0 dial.
http://www.youtube.com/watch?v=Rrrr-cpn6Aw



beaker 08-11-2008 12:48 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
awesome....inspiration for me to get mine together

drupie51013 08-11-2008 01:11 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
im starte to like your car more and more now. makes me wanna sell my b-series out my rex and do a single cam but i cant i have a huge project im working on now. but good luck wit your car.

evo_lucian 08-11-2008 04:38 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the page)
 
man that car hauls some serious ass.. nice work O0

lock-pop! 08-11-2008 08:09 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the page)
 
yeah nice car.... ive been seeing all of your post's on TD16. Good ---- mang!!!!

Guy-Fast 08-11-2008 08:11 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
bogarts are sex. I cant wait to actually drive on mine.

QwikCRX 08-12-2008 06:42 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
yeah chris i really like them to. they are nice and light and also look good.

86 fiero 08-12-2008 07:32 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
holy ---- you bitch slapped that SRT



QwikCRX 08-12-2008 10:00 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
lol yes he was left behind. but then i think he was all stock to.

gfrg88 08-12-2008 11:30 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the page)
 
damn, the more setups like this that i see, the more im leanin towards FAKLAD :8


Good ---- man, keep it up :6

QwikCRX 08-12-2008 11:58 PM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
i do love my D :) thanks for looking in.

kitdelsol 08-13-2008 12:11 AM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the page)
 
Niice vids Bro, and that BEEP BEEP on the bracket racing was funny, ROFL.


QwikCRX 08-13-2008 12:30 AM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
thanks man, when are you trying those 24s out? this friday? i am shooting for a 11.6 friday :)

kitdelsol 08-13-2008 12:37 AM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 

Originally Posted by QwikCRX
thanks man, when are you trying those 24s out? this friday? i am shooting for a 11.6 friday :)

IŽll try this sunday. looking for same times.

QwikCRX 08-15-2008 12:43 AM

Re: My turbo CRX at the drags tonight. (now with ripper vids further down the pa
 
looking like rain here friday , perhaps i will go to test and tune saturday or i will have to wait until next friday.


All times are GMT -5. The time now is 05:26 AM.


© 2024 MH Sub I, LLC dba Internet Brands