|
Re: Is my turbo bad
continue with this... how about on acceleration it only smokes. Also catchcan, will this really help with oil burning?
|
Re: Is my turbo bad
did you open the throttle plate when you did the compression test?
|
Re: Is my turbo bad
hell yeah with the right amount of pcv vacume you can make your bottom end last alot longer and avoid narly blowby. < this is the reason im rebuilding, previous owner let the valve cover breathe through atmosphere not completely recomended
|
Re: Is my turbo bad
Originally Posted by JDMFantasy2K
did you open the throttle plate when you did the compression test?
|
Re: Is my turbo bad
yea you have to hold the throttle wide open when you crank. But thats not gonna get you another 60psi. My stock z6 was 185.
Originally Posted by nonvtec
My vitara block has 125 across the board :6 I say run it into the ground. Smoking problems from turbo include 1. Blowby (get a cathcan) 2. Not enough gravity for oil drain (get more gravity) 3. Too big of an oil feed (run a restrictor or a 3AN line) 4. Turbo seals, smokes on decel and idle (rebuild or get a new one) off the top of my head those are the most common problems, if its not the turbo then I say get a catchcan and then run it into the ground. :y
|
Re: Is my turbo bad
Originally Posted by crxvtec91
All I did was just crank a few times on each one.
|
Re: Is my turbo bad
Originally Posted by sohcpwr
yea you have to hold the throttle wide open when you crank. But thats not gonna get you another 60psi. My stock z6 was 185.
^^ your ---- has 125?? Mines at like 110. And i got .040" decked off my block. ??? |
Re: Is my turbo bad
keep in mind that vitara pistons put your compression at around 8.8:1, so 110 isnt that bad. But im not really sure. It runs great though
|
| All times are GMT -5. The time now is 02:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands