Forced Induction Custom FI Setup Questions

Is my turbo bad

Thread Tools
 
Search this Thread
 
Old 04-07-2006, 02:14 PM
  #1  
0.0 BAR
Thread Starter
 
seerex's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Is my turbo bad

So I have a 91 crx hf, sohc zc vtec swap, hf main SR20det t25 turbo, OBD1 Uber 450s, ss oil line from home Depot. Anyways I did a few test runs using bbka map so I pull in to my drive way and notice oil on the floor. I check it out it was my return line had came lose, so I fix it then I want out for another run and notice it was smoking. I did a compression test and its 125 across the board. So im guessing it might be the turbo because there is oil in the down pipe, or i might need a oil restricker.
Steven,
seerex is offline  
Old 04-07-2006, 02:22 PM
  #2  
1.5 BAR
 
zex_cool's Avatar
 
Join Date: Dec 2005
Posts: 1,129
Default Re: Is my turbo bad

125 in all four
zex_cool is offline  
Old 04-07-2006, 03:09 PM
  #3  
0.0 BAR
Thread Starter
 
seerex's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re: Is my turbo bad

yea each one was 125. Why?
seerex is offline  
Old 04-07-2006, 03:12 PM
  #4  
0.5 BAR
 
h22lude's Avatar
 
Join Date: Nov 2005
Posts: 70
Default Re: Is my turbo bad

thats low, mines 200 across
i think you should be around 160-170
h22lude is offline  
Old 04-07-2006, 07:21 PM
  #5  
1.0 BAR
 
4g63t_EGMonster's Avatar
 
Join Date: Mar 2006
Posts: 234
Default Re: Is my turbo bad

yeah 120 is ok for my motor but not for yours. put a teaspoon of oil in there and it will show you what it should be. also pressure from the oil feed line might have pushed pass the seal or just left a little in there. go dirve it around a bit more to see if it goes away<my guess.
4g63t_EGMonster is offline  
Old 04-07-2006, 07:41 PM
  #6  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: Is my turbo bad

anything below 150 on any cylinder in a stock comp d is a fubared motor
Guy-Fast is offline  
Old 04-08-2006, 01:04 AM
  #7  
1.0 BAR
 
4g63t_EGMonster's Avatar
 
Join Date: Mar 2006
Posts: 234
Default Re: Is my turbo bad

I Was running 118, 115, 118, 110,(regular is about 135-140) and it was horrible. sounds like you need to follow the lead of me and rebuild.
4g63t_EGMonster is offline  
Old 04-08-2006, 08:29 AM
  #8  
0.0 BAR
Thread Starter
 
seerex's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re: Is my turbo bad

This is the same comp I had since befor I want turbo, and it still pulled good and sounds nice.
seerex is offline  
Old 04-08-2006, 10:54 AM
  #9  
3.0 BAR
 
nonvtec's Avatar
 
Join Date: Aug 2003
Posts: 1,950
Default Re: Is my turbo bad

My vitara block has 125 across the board I say run it into the ground. Smoking problems from turbo include 1. Blowby (get a cathcan) 2. Not enough gravity for oil drain (get more gravity) 3. Too big of an oil feed (run a restrictor or a 3AN line) 4. Turbo seals, smokes on decel and idle (rebuild or get a new one) off the top of my head those are the most common problems, if its not the turbo then I say get a catchcan and then run it into the ground.
nonvtec is offline  
Old 04-08-2006, 11:08 AM
  #10  
0.0 BAR
Thread Starter
 
seerex's Avatar
 
Join Date: Jun 2003
Posts: 0
Default Re: Is my turbo bad

Originally Posted by nonvtec
My vitara block has 125 across the board I say run it into the ground. Smoking problems from turbo include 1. Blowby (get a cathcan) 2. Not enough gravity for oil drain (get more gravity) 3. Too big of an oil feed (run a restrictor or a 3AN line) 4. Turbo seals, smokes on decel and idle (rebuild or get a new one) off the top of my head those are the most common problems, if its not the turbo then I say get a catchcan and then run it into the ground.
Thanks for the help.
Steven,
seerex is offline  


Quick Reply: Is my turbo bad



All times are GMT -5. The time now is 11:32 PM.