I've been lurking for years and made a fews posts now and then, so it's a little late. But better than never. Back in 04-05 I had a 99 CX hatch, swapped over everything but the cluster from a 99 Si. Had a Rev Hard 2C kit, Eagle crank and rods, JE pistons and all kinds of other stuff. Almost stock looking on the outside, just 1.5" lower, and Si lip and wheels, Egay type R grill, painted side moulding like an Si and Thermal exhaust. I spent alot of money on that car and then it was stolen. All I got back was an empty shell. It took awhile to get back into it but now I do ---- as cheap as I can.

I picked up an 86 MR2 (Auto, rusty, barely ran, ugly as hell) for $250 almost two years ago for a dd. I rebuilt the engine, changed to 5 speed, fixed the rust and painted it, and threw some wheels on it. All as cheap as possible and all work was done by me.

Before


When I rebuilt the engine the ------- retard at CarQueers sold me some small port high comp pistons. I noticed the small difference and asked around but never got a good answer if they were right for my engine. I went ahead and used them and forgot all about it. Two months ago I boosted it and it lasted about four miles. Yes, four ------- miles. AFR was good, no detonation, just too much pressure. I heard recently that those high comp pistons in a red top 4age make for 11:1 compression or at least 10.3:1. Either way those Beck/Arnley cast pistons didn't last long. It broke the ring lands out of No. 1

Time to put a little more effort into this. The goal was to have a reliable daily driver with around 180 hp. More specifically I want midrange power. That will make an MK1 MR2 fun.

The parts...

4age Red Top

Fresh from the machine shop



.5 mm overbore with .005" piston clearance and decked


cleaned and valve job


Polished parts are pretty


4AGZE 8:1 81.5mm pistons (forged, ceramic coated), stock rods, all toyota bearings.


ARP studs and Toyota HG


Damn I need a welder so I can make my own


Actual Size!


This is the idea


Spec stage 2+




365cc 4AGZE injectors. tapped the rail for a gauge.






DSM intercooler and BPV

For management and tuning I have an LM-1 and det cans. I'm going to break in the engine on the stock ECU, but I am ordering Megasquirt tomorrow.

This project is currently as shown in the last pic. Hopefully I'll start it up this week.

Now gimme some feedback.





And finally what you've all been waiting for...































































Sorry, no noodz. But she still makes my pants tight.

 

u lack the noods but make up for it somewhat with a decent build

 

oh man i want both of those sexy machines

 

That thing is tiny!! The turbo I mean...t3 .48/something i assume ?

Never mind: TDO4l=13G

 

Its gonna run rich as ---- with gze injectors and the stock n/a ecu...I would have held out for the MS or kept the stock inj for break in. Thats just me.

Looks good though man.

 

Actually, I was playing with the AFM and was able to get the AFR at around 11:1 and then it popped.

 

wrong thread

 

I wish I had them to share.

 

Here is some nudes of Jenny : http://www.lostbush.com/babes/110605ftv/m003.html
http://www.sweet-ftvgirls.com/mgals/210/indexthhn.htm
http://www.dailycuties.com/teen/0506/17/p1g2.html
http://www.girls-corner.net/galls/7/...V/gallery.html
http://www.freeones.com/html/j_links/Jenny_Lee/
http://www.sweet-ftvgirls.com/mgals/337/index02trf.htm

There is more if you type Jenny FTVgirls.com in Google