My 1.5 Mirage turbo
#1
My 1.5 Mirage turbo
I have been lurking around for a while now so i thought i would share my ride. 4 years and 3 setups later its finally boosted. here is the low down.
99 mirage de coupe cali spec auto( dont hate the manual is in the trunk)
TD-04HE-13C turbo
t3 flange on stock cali spec manifold
custom down pipe 2'
evo 3 inter cooler
ic piping from evo 8, saab, dsm
Bosch bov
240 cc galant injectors
safc2
aem wide band
msd 6al
megan fpr
nology hot wires
2.5 exhaust
gutted cat
gr2's
aero speed springs
flex-a-lite trans cooler
filled mounts on cross member
vdo boost gauge
hmt vibration dampener
stock fuel pump with msd in-line pump(not installed yet)
99 mirage de coupe cali spec auto( dont hate the manual is in the trunk)
TD-04HE-13C turbo
t3 flange on stock cali spec manifold
custom down pipe 2'
evo 3 inter cooler
ic piping from evo 8, saab, dsm
Bosch bov
240 cc galant injectors
safc2
aem wide band
msd 6al
megan fpr
nology hot wires
2.5 exhaust
gutted cat
gr2's
aero speed springs
flex-a-lite trans cooler
filled mounts on cross member
vdo boost gauge
hmt vibration dampener
stock fuel pump with msd in-line pump(not installed yet)
#6
the most ever seen in this gen 1.5 was 201whp on 15psi stock internals and a 40 shot. vitara piston fit with minor mods but rods are 700 so the only option i have is shot peen stock rods.i had to modify the stock mani cause the only thing close to fitting is an ew4 crx si. just waiting on money to make it faster. sick setup btw.
Last edited by 5G_4G15; 10-17-2009 at 10:08 PM.
#7
I have a hyundai accent with 1.5sohc (apha motor) that I built/boosted. Im running shot peened rod and low compression cast iron pistons and they have held up so far. I was runnin 22psi but on a t25 that was so small it couldnt make no power (I ran it with the wastegate line pulled). It made 195whp and 220 torque im hoping to much more more down with the next turbo.
#9
I have a hyundai accent with 1.5sohc (apha motor) that I built/boosted. Im running shot peened rod and low compression cast iron pistons and they have held up so far. I was runnin 22psi but on a t25 that was so small it couldnt make no power (I ran it with the wastegate line pulled). It made 195whp and 220 torque im hoping to much more more down with the next turbo.