My 1.5 Mirage turbo
9 Attachment(s)
I have been lurking around for a while now so i thought i would share my ride. 4 years and 3 setups later its finally boosted. here is the low down.
99 mirage de coupe cali spec auto( dont hate the manual is in the trunk) TD-04HE-13C turbo t3 flange on stock cali spec manifold custom down pipe 2' evo 3 inter cooler ic piping from evo 8, saab, dsm Bosch bov 240 cc galant injectors safc2 aem wide band msd 6al megan fpr nology hot wires 2.5 exhaust gutted cat gr2's aero speed springs flex-a-lite trans cooler filled mounts on cross member vdo boost gauge hmt vibration dampener stock fuel pump with msd in-line pump(not installed yet) |
Nice. I used to have a 91 mirage. Always thought it would be fun to boost the 4g15.
|
dyno?
|
^not yet waiting to put the manual in. it dyno'ed 71whp na so when i up the boost to 10psi i hope 150whp or more on stock engine.
|
looking gewd i have the hyundai vareint of this motor 4gEK also 1.5, keep boosting it im sure yours can also do 270hp on stock internal's
http://memimage.cardomain.com/ride_i...095_medium.jpg |
the most ever seen in this gen 1.5 was 201whp on 15psi stock internals and a 40 shot. vitara piston fit with minor mods but rods are 700 so the only option i have is shot peen stock rods.i had to modify the stock mani cause the only thing close to fitting is an ew4 crx si. just waiting on money to make it faster. sick setup btw.
|
I have a hyundai accent with 1.5sohc (apha motor) that I built/boosted. Im running shot peened rod and low compression cast iron pistons and they have held up so far. I was runnin 22psi but on a t25 that was so small it couldnt make no power (I ran it with the wastegate line pulled). It made 195whp and 220 torque im hoping to much more more down with the next turbo.
|
niuce
|
Originally Posted by omgbossis21
(Post 1290453)
I have a hyundai accent with 1.5sohc (apha motor) that I built/boosted. Im running shot peened rod and low compression cast iron pistons and they have held up so far. I was runnin 22psi but on a t25 that was so small it couldnt make no power (I ran it with the wastegate line pulled). It made 195whp and 220 torque im hoping to much more more down with the next turbo.
|
Nice work.
|
All times are GMT -5. The time now is 07:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands