HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   max hp on hf manifold? (https://www.homemadeturbo.com/forced-induction-7/max-hp-hf-manifold-84854/)

Vtec_inside 10-12-2007 08:02 AM

max hp on hf manifold?
 
how much is the max hp numbers

you can do with the hf manifold...?

thanks

theebluecrx 10-12-2007 08:58 AM

Re: max hp on hf manifold?
 
Prob as much as the built sohc can handle.With a t3 adapter flange your turbo selection is unlimited.Ditto for spool though.

Vtec_inside 10-12-2007 10:04 AM

Re: max hp on hf manifold?
 
log ac or hf? for best spool and top end flow ????

SDRAWKCAB 10-12-2007 12:15 PM

Re: max hp on hf manifold?
 

Originally Posted by Vtec_inside
log ac or hf? for best spool and top end flow ????

The HF flows three times better, statistically proven, be statistics that prove it.

QUOTE JIZZMASTER ZERO

HondaTuner 10-12-2007 02:36 PM

Re: max hp on hf manifold?
 
by*

It'll flow enough, saw one being rocked on a car that did a best of 12.9 ;)

USS 10-12-2007 03:06 PM

Re: max hp on hf manifold?
 
I'm rocking one on my Vitara/GM9 build. Hoping for 400 whp.

TorganFM 10-12-2007 03:09 PM

Re: max hp on hf manifold?
 
I plan on using the HF manifold as my only manifold, shooting for 300hp once I upgrade to a bigger turbo. I'll be step bitting the O2 hole and welding a WG flange to it for external WG. Cast manifolds ftw.

RotaryGeek 10-12-2007 03:39 PM

Re: max hp on hf manifold?
 
lol i was thinking about that statisticly proven by statistics that prove it quote when i opened this thread.

drunkinmaster1 10-13-2007 01:27 PM

Re: max hp on hf manifold?
 
i dont see why you shouldnt be able to get over 300 hp with an hf manifold thats ported.
ive got a shitty ass drag manifold and its gotten well over 300. i dont see much of an advantage of design between those 2 manifolds.
throw enough cfm through it and it should be fine. only problems with the hf manifolds are that the adapter plate is just another potential leak area.
ebay cast manifolds are getting pretty cheap now ( under $100 with external wastegate port ) so you do the math and figure if its worth buying an hf with adapter plate.

Random Hero 10-13-2007 03:45 PM

Re: max hp on hf manifold?
 
they are hard as ---- to get 300 whp on

On a buddy's setup, on a built motor he put down 179 (9psi) and then he switched to an ebay/ssauto ramhorn and made 237 @ 9psi. and thats the only thing he changed. So just keep that in mind, they flow like ----.

Tom-Guy 10-13-2007 08:23 PM

Re: max hp on hf manifold?
 

Originally Posted by Random Hero
they are hard as ---- to get 300 whp on

On a buddy's setup, on a built motor he put down 179 (9psi) and then he switched to an ebay/ssauto ramhorn and made 237 @ 9psi. and thats the only thing he changed. So just keep that in mind, they flow like ----.

Yeah, the HF ports are super tiny.

I'm not a big fan of hp per psi nonsense, but when efficiency falls off hard you are usually running into a bottleneck. I'd say you won't see more than 275-ish on a ported HF.

absolutezroo 10-13-2007 10:41 PM

Re: max hp on hf manifold?
 
homemade log FTW

Tom-Guy 10-14-2007 12:33 AM

Re: max hp on hf manifold?
 

Originally Posted by absolutezroo
homemade log FTW

+1, and /thread

Schwitzer Turbo 10-16-2007 06:29 AM

Re: max hp on hf manifold?
 
So what is the Final Answer here?

LOG or HF(High Flow/Tubular)

What makes a Log Crap?
what makes a HF Crap?

Can the Log Be perfected? i really like the Quick Spool up of the LOG....

90dx 10-16-2007 07:09 AM

Re: max hp on hf manifold?
 

Originally Posted by Schwitzer Turbo
So what is the Final Answer here?

LOG or HF(High Flow/Tubular)

What makes a Log Crap?
what makes a HF Crap?

Can the Log Be perfected? i really like the Quick Spool up of the LOG....

A log is perfected when installed on a CRX.

Tom-Guy 10-16-2007 07:28 AM

Re: max hp on hf manifold?
 

Originally Posted by 90dx
A log is perfected when installed on a CRX.

+1

+2 when making at least 400 whp.

circleburner 10-16-2007 08:08 AM

Re: max hp on hf manifold?
 
1 Attachment(s)

Originally Posted by Schwitzer Turbo
So what is the Final Answer here?

LOG or HF(High Flow/Tubular)

What makes a Log Crap?
what makes a HF Crap?

Can the Log Be perfected? i really like the Quick Spool up of the LOG....

VERY GOOD QUESTIONS< but wasnt this resolved with the "Chuck Norris" style manifold?
Attachment 23387

absolutezroo 10-16-2007 09:04 AM

Re: max hp on hf manifold?
 

Originally Posted by Schwitzer Turbo
So what is the Final Answer here?

LOG or HF(High Flow/Tubular)

What makes a Log Crap?
what makes a HF Crap?

Can the Log Be perfected? i really like the Quick Spool up of the LOG....

HF isn't an acronym for High Flow. lol

Schwitzer Turbo 10-16-2007 09:19 AM

Re: max hp on hf manifold?
 
oops what does it stand for? i thought you only get 3 styles Log and Tubular than the New Hybrid?

fe3tcourier 10-16-2007 11:49 AM

Re: max hp on hf manifold?
 

Originally Posted by circleburner
VERY GOOD QUESTIONS< but wasnt this resolved with the "Chuck Norris" style manifold?
http://img.photobucket.com/albums/v6...0/000_1637.jpg

got any more pictures of that? from above?

i was wondering wtf hf stood for too, but i wanst going to ask or search, because i dont care too much, then that picture popped up and grabbed my attention :-)

its probably some retrofitted dsm one, or a stocker thats got a U pipe or something.

SDRAWKCAB 10-16-2007 12:20 PM

Re: max hp on hf manifold?
 
HIGH FUEL
Its the super economy edition. ;D

Schwitzer Turbo 10-16-2007 01:42 PM

Re: max hp on hf manifold?
 
Dont ---- around we might be onto sumthing!

klyph 10-16-2007 04:33 PM

Re: max hp on hf manifold?
 
Go to the main page of this site and thoroughly read through every link that doesn't say FORUM.

Not knowing what HF manifold means is ------- disgraceful. Here, let me spoon feed you dumb noob bitches:

https://www.homemadeturbo.com/tech_p...old/index.html

Uh oh, you got a little bit on your chinny chin, let me wipey that off for you!

fe3tcourier 10-16-2007 05:14 PM

Re: max hp on hf manifold?
 
you'd have to know that hf was a honda chassis code. (and care)

lemme check, is this a turbo or honda site?

i was close with the U pipe.

pretty handy that they cast those that way :-) i take it they had a cat there? i wonder if jap spec engines had the same manifolds or not.

ososlohatch 10-16-2007 05:45 PM

Re: max hp on hf manifold?
 

Originally Posted by fe3tcourier
you'd have to know that hf was a honda chassis code. (and care)

lemme check, is this a turbo or honda site?

i was close with the U pipe.

pretty handy that they cast those that way :-) i take it they had a cat there? i wonder if jap spec engines had the same manifolds or not.

your pretty stupid for pretending to be educated.

Tom-Guy 10-16-2007 09:04 PM

Re: max hp on hf manifold?
 
+1

absolutezroo 10-16-2007 09:43 PM

Re: max hp on hf manifold?
 
I think there's a U-pipe stuffed up your herpes infested anus.

88dx 10-16-2007 09:51 PM

Re: max hp on hf manifold?
 
A HF manifold is the only manifold that should be bolted too a D :1

Guy-Fast 10-16-2007 10:27 PM

Re: max hp on hf manifold?
 

Originally Posted by 88dx
A HF manifold is the only manifold that should be bolted too a D :1


or a std manifold :) of course 88-89

fe3tcourier 10-17-2007 03:37 AM

Re: max hp on hf manifold?
 

Originally Posted by ososlohatch
your pretty stupid for pretending to be educated.

...yeah, cause everything about that post SCREAMS stupid...

::)


+1
no response to the engineering literature yet JD, i'm waiting... (but not holding my breath)

ososlohatch 10-17-2007 03:50 AM

Re: max hp on hf manifold?
 

Originally Posted by fe3tcourier
...yeah, cause everything about that post SCREAMS stupid...

::)

no response to the engineering literature yet JD, i'm waiting... (but not holding my breath)

well it doesn't scream stupid to you, however i find it ( along with many other including jd :y ) find it very stupid becouse we know that jap ef's didn't have hf motors, they had zc's or b16's so no i dont think you'll find a hf mani on a b16 jdm crx ;)
JACKASS

circleburner 10-17-2007 05:32 AM

Re: max hp on hf manifold?
 
Just look at that link and all the thouse Manifold are for N/A cars so

HF = A Specific Honda N/A Exhaust manifold. i understand if you Butcher a HF to be used for F/I but didnt see any pics on link.
https://www.homemadeturbo.com/tech_p...ld_all_1_P.jpg

Why cant we create the PERFECT Turbo MANIFOLD(for 1600cc) from scratch?

Tubular turbo manifolds on Small CC's do work but they are more laggy & gentailly Introduce the power, takeing away the LOG's WOW FACTOR

Schwitzer Turbo 10-17-2007 05:44 AM

Re: max hp on hf manifold?
 

Originally Posted by circleburner
Just look at that link and all the thouse Manifold are for N/A cars so

HF = A Specific Honda N/A Exhaust manifold. i understand if you Butcher a HF to be used for F/I but didnt see any pics on link.
https://www.homemadeturbo.com/tech_p...ld_all_1_P.jpg

Why cant we create the PERFECT Turbo MANIFOLD(for 1600cc) from scratch?

Tubular turbo manifolds on Small CC's do work but they are more laggy & gentailly Introduce the power, takeing away the LOG's WOW FACTOR

Went i went From Log to Tubular i was Dissapionted. but i have been Assured that the Tubular is Better although i havent found any Conclusive Proof yet an im only a 1500 12v with NO VTec

This was my Post on this Topic
https://www.homemadeturbo.com/forum/...?topic=76819.0


fe3tcourier 10-17-2007 08:26 AM

Re: max hp on hf manifold?
 

Originally Posted by ososlohatch
well it doesn't scream stupid to you, however i find it ( along with many other including jd :y ) find it very stupid becouse we know that jap ef's didn't have hf motors, they had zc's or b16's so no i dont think you'll find a hf mani on a b16 jdm crx ;)
ososlohatch is a JACKASS

see, i dont know what an ef or ek is, and i didnt know that you couldnt get d15/d16 engines in them, i didn know about the zc in later cars, and the b16 too. i dont care about any fwd cars period. so i dont go looking for info on them. does that make me stupid? how about not living in the US of A? i have no way to have worked on yank spec honda rice boxs, so i funnily enough, dont know ---- about them. i'm not looking to find out anything either, but i will link you these :

http://english.auto.vl.ru/catalog/ho.../1987_0/29526/
http://english.auto.vl.ru/catalog/honda/cr-x/1990_9/
http://english.auto.vl.ru/catalog/ho...delsol/1994_9/
http://english.auto.vl.ru/catalog/ho...elsol/1995_10/
http://english.auto.vl.ru/catalog/honda/civic/1989_9/
http://english.auto.vl.ru/catalog/honda/civic/1991_9/
http://english.auto.vl.ru/catalog/honda/civic/1995_9/

i guess its you looking stupid now huh? "jap efs didnt have hf motors" or does hf not mean D1XX ? once again though, i dont care :-)

have a nice day ;-)

experimental speed test

drunkinmaster1 10-17-2007 09:22 AM

Re: max hp on hf manifold?
 
sounds like somebody got a bit butt-hurt. :X

N1ghtM0nkey 10-17-2007 09:23 AM

Re: max hp on hf manifold?
 
That's what, +5 for JD in this thread?

The man didn't even say anything and he still worked this thread like a street corner in the hood on a friday night. :o

absolutezroo 10-17-2007 04:11 PM

Re: max hp on hf manifold?
 
almost as much as you're working his butthole.


HAHA j/k nig


Tom-Guy 10-18-2007 01:01 AM

Re: max hp on hf manifold?
 

Originally Posted by fe3tcourier
no response to the engineering literature yet JD

I know you have no response, Fred. We've already determined your inadequacy.

fe3tcourier 10-18-2007 04:06 AM

Re: max hp on hf manifold?
 

Originally Posted by absolutezroo
almost as much as you're working his butthole.


HAHA NOT joking nig

you're onto it son. that must be the cleanest well licked anus in the entire world. all those civic/crx/log loving tongues have polished it to perfection :-)

Schwitzer Turbo 10-18-2007 05:13 AM

Re: max hp on hf manifold?
 
JD & Fred

Are you guys in the SAME Country/State?

Hook up! and Have a Quatermile Grudge match Winner takes all,

If not Buy the Same Engine's and turbo charge emto the max see who makes the most HP.

Cos every Thread on this Forum is Becoming a JD VS Fred!


All times are GMT -5. The time now is 02:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands