allmotor65stang

i just want to know if stock injectors will work for 5psi of boost on a ls motor and if i put on some 440 what other kind of wirering do i have to the injectors..

emoretared

Need some more explanation
what car is it?
What year?
Who makes the 440s?
high or low impedance?
6 or 9?
Who is your daddy, and what does he do?

allmotor65stang

95 teg
dsm 440s
stock compression but would stock injectors work for 5psi..OBD1

HondaTuner

Don't be an uber noob, get fuel management.

If you use the 440's, get your ECU chipped and run Crome/Uberdata/Hondata/whatever

If you use the stock injectors, get an FMU. <-- not recommended

allmotor65stang

its just a simple question *****

Slo_crx1

Not so simple. The real question should be 5psi out of what turbo. That would determine if stock or slightly larger would work if you reaaaally plan on cheaping out on an fmu.
But Sinister is right...a chipped ecu tuned for your 440's would be the best and safest way to go, all though it requires you to do alot more research and learning before you go ahead and turn your motor into a time bomb.

allmotor65stang

well i have a set of dsm 440's but do i have to add a resister box for a 95 integra..im new to the b series stuff i know it will work for a 88-91 hatch modle..

EG-prince

yes, you need to wire in the resistor box. Go to www.beesandgoats.com and go to the G2IC turbo guide. READ. READ AGAIN. But ignore the information about safc hacks and fmu's and ----. all you need is a chipped ecu running crome, the 450's, a resistor box, and a tuner.

JDMFantasy2K

i can't believe you guys didn't tell this *** to get a rope yet

sunboost

last i checked the dsm werent 440s*shrugs*