ls intake manifold
im going to use the stock ls intake manifold on my car if it is ported and polished should it flow enuf to make 350hp or should i just buy aftermarket like skunk2 ,str or edelbrock
|
Re:ls intake manifold
Why not list the rest of your setup.
|
Re:ls intake manifold
my setup is b18a block ,crank , srp pistons 9 :1 compression, scat rods, ported ls head ,3 angle valve job ,stock b18b cams turbo set up is t3/t4 .48ar and 60 compresser 60 trim ssautoshit manifold for now tail wg , 2 1/2in intercooler tubing, spearco intercooler 30x6x3, turbo xs bov, dsm 450cc or bigger if needed ,uberdata ,255 pump2 1/2 or 3inch dp i hope that will make
|
Re:ls intake manifold
i think its possible. how much boost you gonna push from that t3/4
|
Re:ls intake manifold
15psi
|
Re:ls intake manifold
Shouldn't be a problem. You will need bigger injectors though and a 3 bar map.
|
Re:ls intake manifold
will pte 650cc injecters be good and just get a gm 3 bar thanks for the help
|
Re:ls intake manifold
That sounds about right.
|
Re:ls intake manifold
How are those rods holding up? I havn't really heard to many oppinions about them so I'm interested in knowing.
|
Re:ls intake manifold
scat h beams with arp bolts they are fine for now they are used in v8s alot my buddy has a set in his mustang and it a 600hp nitrous motor and hes had good luck with them hope i do now you got me worried
|
All times are GMT -5. The time now is 11:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands