ls intake manifold
im going to use the stock ls intake manifold on my car if it is ported and polished should it flow enuf to make 350hp or should i just buy aftermarket like skunk2 ,str or edelbrock
|
Re:ls intake manifold
Why not list the rest of your setup.
|
Re:ls intake manifold
my setup is b18a block ,crank , srp pistons 9 :1 compression, scat rods, ported ls head ,3 angle valve job ,stock b18b cams turbo set up is t3/t4 .48ar and 60 compresser 60 trim ssautoshit manifold for now tail wg , 2 1/2in intercooler tubing, spearco intercooler 30x6x3, turbo xs bov, dsm 450cc or bigger if needed ,uberdata ,255 pump2 1/2 or 3inch dp i hope that will make
|
Re:ls intake manifold
i think its possible. how much boost you gonna push from that t3/4
|
Re:ls intake manifold
15psi
|
Re:ls intake manifold
Shouldn't be a problem. You will need bigger injectors though and a 3 bar map.
|
Re:ls intake manifold
will pte 650cc injecters be good and just get a gm 3 bar thanks for the help
|
Re:ls intake manifold
That sounds about right.
|
Re:ls intake manifold
How are those rods holding up? I havn't really heard to many oppinions about them so I'm interested in knowing.
|
Re:ls intake manifold
scat h beams with arp bolts they are fine for now they are used in v8s alot my buddy has a set in his mustang and it a 600hp nitrous motor and hes had good luck with them hope i do now you got me worried
|
Re:ls intake manifold
No, no don't be worried. I was just curious because I'm in the process of doing an LS build very similar to your setup and power goals. I was going to go Eagle H beams thoug only because I know the reliability and quality I'm getting. Scat is fairly new to me and I havn't heard of too many people who are using them so I had no idea what kind of product they have. But we'll find out ;D Good luck
|
Re:ls intake manifold
i was going to use eeagle also but my build cost was more than i had to spend and for the cost i thought they was a good deal got them off of ebay for 270.00 plus shipping i didint know if you have heard any thing bad about them they are doing good for now hope it stays that way
|
Re:ls intake manifold
the small ends in the scat rods i used in my 4g63 were the wrong size and needed to be machined :-\
|
All times are GMT -5. The time now is 10:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands