t57b18

im going to use the stock ls intake manifold on my car if it is ported and polished should it flow enuf to make 350hp or should i just buy aftermarket like skunk2 ,str or edelbrock

SpankedYA!

Why not list the rest of your setup.

t57b18

my setup is b18a block ,crank , srp pistons 9 :1 compression, scat rods, ported ls head ,3 angle valve job ,stock b18b cams turbo set up is t3/t4 .48ar and 60 compresser 60 trim ssautoshit manifold for now tail wg , 2 1/2in intercooler tubing, spearco intercooler 30x6x3, turbo xs bov, dsm 450cc or bigger if needed ,uberdata ,255 pump2 1/2 or 3inch dp i hope that will make

bluemax189

i think its possible. how much boost you gonna push from that t3/4

t57b18

15psi

SpankedYA!

Shouldn't be a problem. You will need bigger injectors though and a 3 bar map.

t57b18

will pte 650cc injecters be good and just get a gm 3 bar thanks for the help

SpankedYA!

That sounds about right.

tranceminister

How are those rods holding up? I havn't really heard to many oppinions about them so I'm interested in knowing.

t57b18

scat h beams with arp bolts they are fine for now they are used in v8s alot my buddy has a set in his mustang and it a 600hp nitrous motor and hes had good luck with them hope i do now you got me worried