SilverT

Learned from a magazine that you can adjust psi on the t25 to lower it, not by lengthening the arm on the wastegate actuator but by bending the actuator in from the plate that attaches to the compressor. They said bend it .25" in and it will hold at 5-6psi. Maybe someone else thought of that before but this is the first time i heard of it.

TeamMootRacer

i lengthen my arm to lower boost, now i have a lot more lag. I justgot a wastegate actuator from a WRX i'm going to rig up instead.

SilverT

I am guessing this mod will also cause lag because it gives the same result as making the arm longer

kErO-916

hey silvert what mag did you see that in ?

turbohf

it was in Honda Tuning, the article with the ricey CRX with the HMT on it...

kimbo

Yes it was April '03 issue..

I have a T25 with an internal wastegate that I need to adjust also and was also wondering if anyone has done this? I need to lower the boost because it is pissing me off that I cannot WOT my car yet because I am paranoid ama blow my motor haha

Tad

I believe shortyz has a page on his site showing how to setup an adjustable internal wastegate. basically you cut the arm in half, and put a threaded connector on it that way you can lengthen/shorten it with ease.

but yeah I think any adjustment you do causes lag, lengthening, bending, whatever

Semnos

this was already talked about here though
A long time agoo

J-MAN

have you ever tried to bend that before? not too easy...

Johnyquest

you can go WOT just to see how high it will boost. You won't blow your motor INSTANTLY. It'll take a few seconds... Just do it in 3rd gear real quick and then let off...