vxhybrid

how can i check if it is blowing by the seals

45psi

sorry, i read that post wrong. if there isnt oil in the pipes, your seals are good.

vxhybrid

i havnt checked the exaust side yet for oil
i now have a oilleak at the oilpan?? could this be caused by the pvc being hooked up still

45psi

without seeing a pic of your plumbing i can only guess. if your pvc is hooked to the charge pipe, thats your problem right there.

idiot-stick

yeah, leaving the PCV valve hooked up is bad mmkay.

vxhybrid

i talked to turbo technologies and they said that my turbo has no oil seals to blow just a piston style ring. im retarted my pvc is still hooked to the intake manifold. im fixing that tonight and im pulling the turbo to check for oil in the exaust side.

45psi

try just unhooking the pcv and take a run. you might have a ---- eating grin of relief. purely for the sake of saving wrech time taking the turbo off and on.

vxhybrid

i had to pull the downpipe so i could replace teh oilpan gasket. the turbo was not leaking. i disconected the pvc so i will see how that works tommorow

45psi

good luck man, let us know how it goes

vxhybrid

it still smokes a little but that may be cause i havenot turned down the restricter valve enough