just realized how big my turbo is... lol **new pics**
06-23-2006, 03:02 AM
#11
0.5 BAR
Thread Starter
Join Date: Apr 2005
Posts: 91
Re: just realized how big my turbo is... lol
blaast yes its a 6 bolt "O" (not a v band) dp look and are you sure about the specs? its stamp .70 on the outside of the compressor housing. and i remember it having .63(i know for sure in the .6?'s) inside the compresser outlet....
i read this somewhere this is how i thought the trim and specs are read...
stamp on outside housing equal trim : .70
stamp on inside of compressor housing oulet : .63 ish(around there i think)
stamp on exhaust side of the housing : .84
and yes it is a twin scroll turbo also.... i did not block one of the ports...
don't mind the oil issue... its fixed
old setup
new setup
some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp...
i read this somewhere this is how i thought the trim and specs are read...
stamp on outside housing equal trim : .70
stamp on inside of compressor housing oulet : .63 ish(around there i think)
stamp on exhaust side of the housing : .84
and yes it is a twin scroll turbo also.... i did not block one of the ports...
don't mind the oil issue... its fixed
old setup
new setup
some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp...
06-23-2006, 03:12 AM
#12
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: just realized how big my turbo is... lol
Originally Posted by ****
if its a twin scroll exhaust housing, make a plate that blocks one side off...it'll spool then.
Jeffy had a 1.00 housing on his zc seemed to spool pretty nicely
06-23-2006, 08:33 AM
#15
1.0 BAR
Join Date: Nov 2004
Posts: 204
Re: just realized how big my turbo is... lol
Originally Posted by projekz
blaast yes its a 6 bolt "O" (not a v band) dp look and are you sure about the specs? its stamp .70 on the outside of the compressor housing. and i remember it having .63(i know for sure in the .6?'s) inside the compresser outlet....
and yes it is a twin scroll turbo also.... i did not block one of the ports...
some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp...
and yes it is a twin scroll turbo also.... i did not block one of the ports...
some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp...
prolly better suited for a 2.5-3.5 liter engine?
06-23-2006, 07:04 PM
#18
3.0 BAR
Join Date: Dec 2005
Posts: 2,081
Re: just realized how big my turbo is... lol **new pics**
It should spool faster since the same amount of exhaust is going into the turbo, just at a higher velocity correct?
Edit: i'm suprised nobody said anything about the fmu :P
Edit: i'm suprised nobody said anything about the fmu :P
06-24-2006, 03:01 AM
#19
3.0 BAR
Join Date: Oct 2004
Posts: 1,811
Re: just realized how big my turbo is... lol **new pics**
Originally Posted by Stealthmode
No boost in first gear and full boost by 4500 in all the others? That's some good traction control right there. I'd say it's perfect.
06-24-2006, 06:07 AM
#20
0.5 BAR
Thread Starter
Join Date: Apr 2005
Posts: 91
Re: just realized how big my turbo is... lol **new pics**
yes i do have an fmu... but debating if i'm gonna stick with the car still or not... have 450's setting in my trunk... or my back seat somewhere lol. if i do plan to keep it i was gonna have a shop dyno tune it for me. so yea...
