Re: just realized how big my turbo is... lol
blaast yes its a 6 bolt "O" (not a v band) dp look and are you sure about the specs? its stamp .70 on the outside of the compressor housing. and i remember it having .63(i know for sure in the .6?'s) inside the compresser outlet....
i read this somewhere this is how i thought the trim and specs are read... stamp on outside housing equal trim : .70 stamp on inside of compressor housing oulet : .63 ish(around there i think) stamp on exhaust side of the housing : .84 and yes it is a twin scroll turbo also.... i did not block one of the ports... http://img136.imageshack.us/img136/1557/10006965tw.jpg http://img136.imageshack.us/img136/9306/10007001uz.jpg http://img136.imageshack.us/img136/2203/10007031af.jpg don't mind the oil issue... its fixed http://img84.imageshack.us/img84/8966/10006977zr.jpg http://img144.imageshack.us/img144/824/10006250io.jpg old setup http://img98.imageshack.us/img98/6792/10007156cz.jpg new setup some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp... |
Re: just realized how big my turbo is... lol
Originally Posted by FooK
if its a twin scroll exhaust housing, make a plate that blocks one side off...it'll spool then.
Jeffy had a 1.00 housing on his zc seemed to spool pretty nicely |
Re: just realized how big my turbo is... lol **new pics**
would it really make that much of a difference with that block off plate? if so what can i make it out of... ?
|
Re: just realized how big my turbo is... lol **new pics**
steel plate and yes you think a 1.00 housing would spool on a 1.6 no
look at the blue thunder install video car rips |
Re: just realized how big my turbo is... lol
Originally Posted by projekz
blaast yes its a 6 bolt "O" (not a v band) dp look and are you sure about the specs? its stamp .70 on the outside of the compressor housing. and i remember it having .63(i know for sure in the .6?'s) inside the compresser outlet....
and yes it is a twin scroll turbo also.... i did not block one of the ports... http://img84.imageshack.us/img84/8966/10006977zr.jpg some of you guys say your surprised about it actually spooling? now i'm curious what motor this turbo would be perfect for and maximum hp... prolly better suited for a 2.5-3.5 liter engine? |
Re: just realized how big my turbo is... lol
Originally Posted by chris
he speaks the truth
Jeffy had a 1.00 housing on his zc seemed to spool pretty nicely https://www.homemadeturbo.com/turbo_...ZC_turbo_P.jpg |
Re: just realized how big my turbo is... lol **new pics**
No boost in first gear and full boost by 4500 in all the others? That's some good traction control right there. I'd say it's perfect.
|
Re: just realized how big my turbo is... lol **new pics**
It should spool faster since the same amount of exhaust is going into the turbo, just at a higher velocity correct?
Edit: i'm suprised nobody said anything about the fmu :P |
Re: just realized how big my turbo is... lol **new pics**
Originally Posted by Stealthmode
No boost in first gear and full boost by 4500 in all the others? That's some good traction control right there. I'd say it's perfect.
|
Re: just realized how big my turbo is... lol **new pics**
yes i do have an fmu... but debating if i'm gonna stick with the car still or not... have 450's setting in my trunk... or my back seat somewhere lol. if i do plan to keep it i was gonna have a shop dyno tune it for me. so yea...
|
All times are GMT -5. The time now is 12:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands