HomemadeTurbo - DIY Turbo Forum - Just need a tune! 56k die!

Page 7 of 10

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Just need a tune! 56k die! (https://www.homemadeturbo.com/forced-induction-7/just-need-tune-56k-die-87127/)

confucioussae

01-06-2008 03:57 PM

Re: Just need a tune! 56k die!

glad to hear! post updates nig nog!

nonvtec

01-06-2008 05:09 PM

Re: Just need a tune! 56k die!

Why don't you use some free engine management instead of that AFC? Where are you located?

Birdley42008

01-06-2008 05:59 PM

Re: Just need a tune! 56k die!

Im working with what I have. Im going to run my y7 im and afc for awhile until i want to up the boost and build my engine mildly. The soul purpose of this car is to beat stock camaros and mustangs.

WTF	01-12-2008 05:15 AM

Re: Few pictures before its done. 56k die!

Quote:

Originally Posted by Braineack

I used a pvc elbow on my BOV recirculation, it melted after a while. took me a while long time to figure it out, i kept clamping down on all my pipes when my idle started to digress untill one day it was so bent out of shape the coupler popped off and the bend was unrecognizable.

So here I am...not speaking out of my ass.

basicly you were to retarded to figure out the obvious boost leak sounds like. i know people that used pvc just fine, just be careful where u put it

Birdley42008

01-23-2008 06:05 PM

Re: Just need a tune! 56k die!

On my dip stick I have alittle milky oil. I know that water makes oil go milky. What shall I do. It seems I only get it when my car is cold. Is this normal for cold climates.

marcj

01-23-2008 07:00 PM

Re: Just need a tune! 56k die!

Quote:

Originally Posted by Birdley42008

in a 1900-1800lb car.

how the ---- did you drop so much weight? those things weigh ~2300 lbs stock..

boosted 00 black si

01-23-2008 10:04 PM

Re: Just need a tune! 56k die!

no that not normal..drop the oil in to a dran pan and take a look at it if its milky u got a problem...try checking ur head gasket

Birdley42008

01-23-2008 10:28 PM

Re: Just need a tune! 56k die!

I dont believe its my head gasket! My oil pan has a leak and I think that is what is causing my oil to turn milky. My oil pan was off for awhile and the car was sitting in my garage. I cleaned everything before I put the pan back on but could clean everything.

turbo4life

01-24-2008 04:25 AM

Re: Just need a tune! 56k die!

pvc rock i still use it ;D cuz its so much cheaper and u can glue elbow to it and minimize conectons taht can get blown off by high boost also use duble clams.. i just upse a pice of steel or aluminum around the compressor outle... cehck out my old ---- hatch project my coupe is rocking the top pvc pipe from tat set up at 15 psi no problems i bet it would be just fine for a super high boost set up like 30 or someting if u just used steel or alumium before the intercooler and pvc after.. and u would not have charg pipes flying off problem like using double or trippple hoe clamps!
i like this htm build

turbo4life

01-24-2008 04:27 AM

Re: Just need a tune! 56k die!

i used black pvc (ABS) i like it better cuz it gives it the black stealth look

All times are GMT -5. The time now is 03:18 PM.

Page 7 of 10

Show 40 post(s) from this thread on one page