|
Re: Few pictures before its done. 56k die!
yet again, turbo's dont normally do people wrong sitting in your garage.
ahaha you actually have to out it on your car before you could have it go wrong unless you have one of the SUPER t3 turbos with the 4.8 rated bizznitch that magicially spools up on its onw when the temerature drops beliw 15 degrees in the room :S you're a nog man, just boost it |
Re: Few pictures before its done. 56k die!
I love you fellow HMT member, Merry Christmas, lets not fight during the holidays. My New Years resolution is to not be such a noob, I have failed you!
|
Re: Few pictures before its done. 56k die!
Originally Posted by Birdley42008
I love you fellow HMT member, Merry Christmas, lets not fight during the holidays. My New Years resolution is to not be such a noob, I have failed you!
j/k :-* |
Re: Few pictures before its done. 56k die!
Just use the PVC till she pops. Christ almighty... ::) Then just get another piece after that. :6
|
Re: Few pictures before its done. 56k die!
Quick question. I need to run a vacuum line from my btm to a sufficent vacuum source like the fpr. My fpr is already t'd off for my boost gauge. Is it cool to t of the boost gauge or should i t off the bov? Thanks.
|
Re: Few pictures before its done. 56k die!
Originally Posted by Birdley42008
Quick question. I need to run a vacuum line from my btm to a sufficent vacuum source like the fpr. My fpr is already t'd off for my boost gauge. Is it cool to t of the boost gauge or should i t off the bov? Thanks.
|
Re: Few pictures before its done. 56k die!
Everything is ready! I went to start my car tonight and it would turn over and start to fire but it wouldnt start! It smelt alittle like gas but I think thats cause I was pumping the gas. It hasnt ran for awhile like 3 or 4 months. I tried for a good 15 min to get it to start but it wouldnt turn over! I check distributor wire order it was good I check a few other things everything seemed right. I tried the nob on my btm at o and 1 both wont make my car fire! Any help would be much appreciated! Thanks.
|
Re: Few pictures before its done. 56k die!
It starts to putter like it will start but doesnt! Could it be that I have not yet fully pressurized my fuel system? And there might just be air bubbles i need to peddle out?
|
Re: Few pictures before its done. 56k die!
Ok I think I got it! One of the injectors was covered in gas and was leaking gas onto the ground. I figure it is clogged with ---- and wont let gas pass through therefore spewing it out of the top of the injector by the fuel rail! Sound right if an injector is covered in gas?
|
Re: Few pictures before its done. 56k die!
Bump! For some help from my troubleshooters! Thanks
|
| All times are GMT -5. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands