Re:Johnnyracecar FMIC
 

i have the 32x5 and im in the process of installing it right now.. to get it to line up with the hole in the bumper i am having to cut the ---- out of the bumper support! be prepared for some custom work.. heres the mock install of it so far
[img width=500 height=350]http://home.alltel.net/slacklin/fmic.jpg[/img]

;D

Re:Johnnyracecar FMIC
 

i resized your pic man, try not to make them so big. as far as cutting and hacking, it really depends on the car, but it should fit most civics very easily. gree91, where is your bumper support, things would have been a lot easier for you if you got the mounting tabs on the top ;) i didn't have to cut anything except for the plastic out of the opening on the bumper.


http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re:Johnnyracecar FMIC
 

on the 5" core the tabs are on the end tanks..
to get it lined up perfectly for the front hole on my civic bumper im having to cut quite a bit out and is why the support isnt on yet, going to finish cutting/welding it today.. then cut the plastic on the bumper. what did you use to cut the plastic with? i want a clean edge so im debating on how im going to do it

Re:Johnnyracecar FMIC
 

well mine's only a 6 in, but the guy who makes mine gives you a choice if you want the mounting tabs on the back or top. i just used a dremel with a cutting wheel, then sand it down a little to get the melted plastic off, although i have used a steak knife before :P

Re:Johnnyracecar FMIC
 

4th gen's require an ass of cutting to get these intercoolers in there. If you've got an SI bumper then have fun with that, but I used an hf which is really small, you also have to hack up the bumper cover ALOT.

Re:Johnnyracecar FMIC
 

LOL, im starting to get scared!! Ill find a way to mount it somehow, i just couldnt resist 155 shipped for it, i actually stayed up until 5:00Am so that i could pay with paypal!! Shits been down for the past week it seems!!
Im so happy!! ;D ;D

Oh and i think that the 32x5 will be perfect for me, it seems like it sits perfect in EF's front bumper, and will flow probably more than enough air to it!

Re:Johnnyracecar FMIC
 

http://www.johnnyracecar.com/newjohnny/20040803a.jpg

Tyrus just sent me this one to try out, Looking forward to it, the core is thicker, has top/bottom plates and supposivly it flows better. I'll letcha guys know how it fits.

Jeff

Re:Johnnyracecar FMIC
 

Where would I go about finding one of these taller ones?

I actually have a 4G Accord so what works on a civic isn't likely to work on an Accord. I didn't think an FMIC would make much difference, do you have any kind of ball park figure of the difference between the two designs?

Re:Johnnyracecar FMIC
 

is it just me or have the tyrus front mounts gone down in price recently?

Re:Johnnyracecar FMIC