jb weld strength
this may be hard to explain. but i will try.
the charge pipe i have to the tb has a flange for the greddy bov. i am putting a blitz on it. i had to not only remove the flange but also the little section of pipe coming off the charge pipe to the flange. the pipe is 2". the id of the blitz bov is considerably smaller. I made a cover to cover up the hole from the previous section of pipe leading to the flange. from the cover i will put on a new section of pipe leading to the flange for the blitz bov. i basically want to know if i can use jb weld to put the flange on the pipe, and that pipe on to the charge pipe. the max psi this kit will see is 15psi. (i am not going to start out at 15psi) but i want it to be stable to run that next year. if anyone knows if the jb weld will work let me know. if i dont jb weld it i will have it welded (i dont have a welder). that is why i kinda want to jb weld it. -rollmodel |
Re:jb weld strength
jb weld will hold just fine as long as you prep the material properly before you "weld" any contamination can keep it from being a good bond so clean it well.
mark |
Re:jb weld strength
alright.. thanks. i have jb welded things in the past.. oil pan..etc. but i haven't welded something that needs to stand up to any real psi. i know that 15psi is not a whole lot.. but i dont want to jb weld it, have it break and then have to remove all the jb weld. cause that stuffs smells like crap if you use a grinder on it.
-rollmodel |
Re:jb weld strength
It will probably work. As a noncertified autotech, my official opinino is Probably. But remember, there is nothing more embarasing than driving a girl around and having your bov blow off while racing a dsm.
|
Re:jb weld strength
Man, its a BOV and a charge pipe... take it to a place that does welding and have them weld it up.. JB Weld on charge pipes... definatly something I wouldnt do.
|
Re:jb weld strength
45psi wrote: But remember, there is nothing more embarasing than driving a girl around and having your bov blow off while racing a dsm. -rollmodel |
Re:jb weld strength
I think it will hold just fine, like the guy above as long as u clean the metal and everything, GOODLUCK
|
Re:jb weld strength
I don't get it, why do people on this forum use so much JB weld?
|
Re:jb weld strength
ummm....this site is "ghetto" so most of us dont have welders so its either jb weld or......... ???
|
Re:jb weld strength
duct tape ;D
|
All times are GMT -5. The time now is 10:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands