|
Re: install came to a little hault....few questions
rx7 460cc
p28 5 speed stock but have the tiny ass 2.5 that i need to install after i fix my little issues |
Re: install came to a little hault....few questions
when the car is off how far should the oil come to the top of the pan? my oil return line is welded as far to the top as it can be and when i was taking it off the oil level was higer and i lost about a quart
|
Re: install came to a little hault....few questions
Originally Posted by civiceggturbo
rx7 460cc
p28 5 speed stock but have the tiny ass 2.5 that i need to install after i fix my little issues |
Re: install came to a little hault....few questions
Originally Posted by civiceggturbo
when the car is off how far should the oil come to the top of the pan? my oil return line is welded as far to the top as it can be and when i was taking it off the oil level was higer and i lost about a quart
|
Re: install came to a little hault....few questions
Sent
|
Re: install came to a little hault....few questions
Originally Posted by civiceggturbo
yea it worked in my car before i chipped it, no codes i have a toggle switch so i dont have to see the solid cell so when its flipped it would blink if there was a code
the two pins in the green harness with a cable got real old when i was getting the codes off my d16 |
Re: install came to a little hault....few questions
still have the solid check engine light with the new bin, but it seems to be burning less oil after i changed fittings from a straight barb to a 90 degree one, i think if i just run a larger size hose the oil consumption will stop all together
does anyone recomend a place on the board to check my connections first |
Re: install came to a little hault....few questions
never mind, ---- that damn switch...cut it no cel lol
i have tried it before but that was when i wasent removing checksum from my crome bins easy enough fix.....im actually kind of pissed that it was the switch....i have been dickin with it for nearly 6 months Friday i plan to drill and re-tap my oil drain and run it to a bucket hopefully it will fix it.. |
Re: install came to a little hault....few questions
Sounds like a bad chip job maybe? I would try the ECU in another car, even though you'll probably get the same results.
|
Re: install came to a little hault....few questions
its works...no cell lol i confused myself with the position of the switch :X
|
| All times are GMT -5. The time now is 03:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands