Hello all, I was wondering if the stock fuel injectors would be adequate for a setup on my Sterling 827sli (c27a1 honda v6 engine.) I know most people on this board are running the 450cc dsm injectors on their 4 cylinders, but would the fuel provided by the extra 2 cylinders be enough ? Im not planning on making a race car or anything.Just mild boost. My plans are to use a t3 .60 /63 with safc and probably a walbro 255lph.

Also ,I was looking at some part numbers and it appears as if most honda injectors from around 1989 (my car has the same engine as an 89 acura legend)are the same. Is it safe to assume that the modifications to fit 450cc dsm's would be the same for my engine? I can scan a picture of the injector schematic drawing if it would help identify it.
Thanks for taking the time to read this, any info is appreciated.
Brian

 

just chech out the tech projects when you come in the site. there's a write up about installing dsm 450s' yes they'll fit your car but you're gonna have to grind down the inside of the injector seals a little bit.