Injector help
#1
Injector help
I am currently purchasing all my turbo parts to install on my D14A4 engine with a boost of 6.5 psi.
I have a adjustable fuel pressure regulator on my car at the moment and was told that I should really have installed bigger injectors when installing. Two questions:
One: Is this true?
Two: What sort of injectors should I install with regards to cc and/or ohms as I don't understand injectors at all.
Thanks
I have a adjustable fuel pressure regulator on my car at the moment and was told that I should really have installed bigger injectors when installing. Two questions:
One: Is this true?
Two: What sort of injectors should I install with regards to cc and/or ohms as I don't understand injectors at all.
Thanks
#2
Re: Injector help
Yes, I have a d16y7 im going to run 10 psi on a 48/60 t3 turbo, using air fuel control safc2, btm boost timing master, and 450cc injectors. You can get a pair of injectors around here between 65 - 45 dollars, MAKE SURE THEY WORK TOO.. you can get them cleaned and flow tested by professionals around you, just look. You should also use 10 ohm 10 watt individual resistors, four of them, you get them at radio shack or order them on their site, heres a good write up....
https://www.homemadeturbo.com/tech_p...ors/index.html
PS post some **** for all of us, its the way things are done around here, with these **** junkies and all.
https://www.homemadeturbo.com/tech_p...ors/index.html
PS post some **** for all of us, its the way things are done around here, with these **** junkies and all.
Thread
Thread Starter
Forum
Replies
Last Post
T-RO
Turbo Parts For Sale
2
02-02-2004 06:11 PM
Sinner
Turbo Parts For Sale
3
10-04-2003 06:47 PM