pojet14

or what do you think about this intakemanifold

stillnoturbo

Don't post crap like that and then ask for help from Hotrex or anyone else cause posting ---- like your gonna get 3rd degree burns from all the flaming your gonna get from those gay OBX manifolds. Now thats runon sentence if I ever saw one! Stick to the stock y7 mani cause more likely those cheap things won't seal right or you'll have to mod the ---- of out it to make it fit cause it'll probably won't clear something with all the R&D OBX does.

bitchasscracker

just use a vafc and you'll be fine as long as you dont try to boost to high.

pojet14

i thout about the obx because they have a y8intakemanifold for good price so i need to know do i need a y8intakemanifold to run 9psi or 8psi cause every d16y7 on here dose the y8 intakemanifold so what do think and if i do were can i get one cuase the junk yards around here dont have ----

SpankedYA!

Yes all OBDI are 2 wire IAC.

Tom-Guy

Actually, you can jiggle Y7 IACV pins about to lose the CEL, and then just block the damn thing off with RTV + a thin piece of cardboard. Fiddle throttlestop and airbleed screw on TB until desired idle is acheived. Strange how you start, idle, and run just like stock without an operational IACV.

Be careful of Josh Ross aka hotrex. He'll expect hot, steamy 2 am phonesex and then get angry and hang up on you when you don't give it to him. He can get your turbo bolted on, but you'll probably be forced to pay the bill in mansex.