Title says it, does anyone have the list of exact sizes for the bolts needed for the HF manifold to 13G adapter made by BMC racing, I lost mine and need it bad, and quick as possible.

 

---- cant find that list,but you can email bmc, had to get all my bolts from ace hardware, but now just recently autozone started carrying a full line of all the bolts that are needed also.

 

Email BMC, he will send you the hex bolt for the countersunk hole, and the rest can be found at a hardware store.

 

You will need (3) 10-1.5MM aprox 25MM long to bolt thru the HF manifold and into the adapter, (1) 10-1.25MM aprox 40MM long to bolt all the way thru from the HF manifold and into the DSM Turbo, and last but not least (2) 8-1.25MM bolts/studs/nuts to bolt the turbo to the turbo. There is a complete write up for the 14B somewhere on this site for the install. The instructions should be the same for the 13G. BTW..I would recommend Socket Head Cap Screws for the HF side of the project as there is limited wrench clearance at the HF Manifold. I would also recommed that you use studs/nuts for the 8-1.25MM aprox 40MM long.

-Sam