I installed my Kit, and am having problems with oil return! PICS!
#13
Re:I installed my Kit, and am having problems with oil return! PICS!
Originally Posted by ghettoturbo
Originally Posted by RENR
Originally Posted by ghettoturbo
i would rotate that center section so it points back more
#14
Re:I installed my Kit, and am having problems with oil return! PICS!
if that return tube is HORIZONTAL just make sure its above the oil level of the pan when full. to find out.. do this...
Drain the oil into a pan. take off the oil pan. Now you can look for stains that might tell you the normal level of the oil. or you can put the drain plug back in and with the pan on the ground fill it up with the oil. If that hole gets submerged in the oil you will definately smoke and I'd say get your manifold shortened about 3".
Drain the oil into a pan. take off the oil pan. Now you can look for stains that might tell you the normal level of the oil. or you can put the drain plug back in and with the pan on the ground fill it up with the oil. If that hole gets submerged in the oil you will definately smoke and I'd say get your manifold shortened about 3".
#19
Re:I installed my Kit, and am having problems with oil return! PICS!
Originally Posted by 45psi
that manifold looks familiar... but anyway, hit up a plumbing store and get some adapting extensions.
https://www.homemadeturbo.com/forum/...threadid=16133
Thread
Thread Starter
Forum
Replies
Last Post
[Ennis_D]
Forced Induction
3
09-22-2010 01:37 PM
f***myzc
Engine Management
12
12-10-2007 11:27 PM
iluvmysh
Forced Induction
5
03-05-2005 01:30 AM
SkunT
Forced Induction
48
01-19-2005 04:36 PM