Help w/ Vacuum Lines
Thread Starter
0.0 BAR
Joined: Feb 2004
Posts: 4
Help w/ Vacuum Lines
Hey guys.
I have a few questions about vacuum sources.
Only the wastegate, boost controller, and the BOV need vacuum sources, correct?
I was wondering if someone had links to a DIY that shows which lines to "T" into. What measurement T's should I use?
Pics would be very helpful. Thanks for being patient
-Chode
I have a few questions about vacuum sources.
Only the wastegate, boost controller, and the BOV need vacuum sources, correct?
I was wondering if someone had links to a DIY that shows which lines to "T" into. What measurement T's should I use?
Pics would be very helpful. Thanks for being patient
-Chode
Guest
Posts: n/a
Re:Help w/ Vacuum Lines
tee into any vac line coming off the intake manifold itself...and use the size that matches the line you're cutting 
...for the wastegate actuator, you can also use the fitting on the compressor of the turbo if it has one, although that will give you a lower initial boost setting. the boost controller will go on the line from your vac source to the wastegate actuator itself
...for the wastegate actuator, you can also use the fitting on the compressor of the turbo if it has one, although that will give you a lower initial boost setting. the boost controller will go on the line from your vac source to the wastegate actuator itself
Thread
Thread Starter
Forum
Replies
Last Post
Stephen
Turbo Parts For Sale
5
Apr 16, 2007 11:39 PM
