heres the problem, I got 92 prelude f22a1, t-3 was at 8psi, than turned it up to 10psi, I had some blueish white smoke coming out of the tail pipe. I thought maybe a head gasket, than. I open my hood while the car was running and where the breather valve that comes out of the valve cover, was blowing oil and light smoke and a lot of air, also If I hold my finger over the hole it builds up a lot of presser. same thing with oil cap and dip stick hole. car idles a little rough. than I turned the boost down to 0 same thing, any thoughts, i'm going to do a compression test in 5 min.

 

ok the compression test tells all, 75, 165,160,165. so it looks like its time to swap that h23 in there. might start it this weekend. later Ray

 

getting blow by past the rings and pressure building up in motor good luck on swap

 

thanks, boosted h23 soon

 

wow blow comin out the valve cover scrape that ---- up and sell it. is it like columbian gold or more of your everyday regs?

 

MMMMM... Blow.... Yummmmy!!

 

LOL, Blow, I'm going to start to baging it tonight. hahaha

 

LOL
...I had to read that 3 times over to get it. good ----