HomemadeTurbo - DIY Turbo Forum
Page 4 of 8
1
2
3
4
5
6
7
8
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   HOW MUCH BOOST CAN I RUN? (https://www.homemadeturbo.com/forced-induction-7/how-much-boost-can-i-run-78042/)

samson 05-20-2007 05:24 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Originally Posted by bensbaby
i think ill stay ty

just to piss u off with ur rotted out crx....

hahahaah

do u do the fred flinstone to stop?

haahhahahahahaahah

i bet u do


That was rude. Listen, you never explained yourself. You said Y8 pistons, so we assume it's in a....Y8, which it's not it was in a D15 which also means it needed bored/honed to fit a larger piston. In turn, it is NOT a normal set-up. You mentioned two different engine codes and expected us to understand what you want exactly. Where you are at is going to be fine and the rods are far to small to really push it much further.


JP

Slo_crx1 05-20-2007 05:30 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Originally Posted by samson


That was rude. Listen, you never explained yourself. You said Y8 pistons, so we assume it's in a....Y8, which it's not it was in a D15 which also means it needed bored/honed to fit a larger piston. In turn, it is NOT a normal set-up. You mentioned two different engine codes and expected us to understand what you want exactly. Where you are at is going to be fine and the rods are far to small to really push it much further.


JP
Bore is the same from the d15's to d16's...stroke is different. I know personally that d15 pistons will fit a d16 bore.

samson 05-20-2007 05:33 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Originally Posted by slo_crx1
Bore is the same from the d15's to d16's...stroke is different. I know personally that d15 pistons will fit a d16 bore.
I was wondering that as I typed it, but didn't know for sure. Still not a typical style set-up. Thanks for clarification though. ;) ;D Where does the other .1L come into play then? Do they only fit because the cylinder walls aren't perfectly OEM spec and a little looser? Just curious.


JP

Slo_crx1 05-20-2007 05:35 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Originally Posted by samson
I was wondering that as I typed it, but didn't know for sure. Still not a typical style set-up. Thanks for clarification though. ;) ;D Where does the other .1L come into play then? Do they only fit because the cylinder walls aren't perfectly OEM spec and a little looser? Just curious.


JP
It's done the same way as say a b16 compared to a b17...longer stroke creates more displacement, even though they both have the same block/head.

Originally Posted by bensbaby
THEY FIT PERFECT....THE CAR IS RUNNING MINT....

I KNOW EVERYTHING ABOUT ECLIPSES AND DSMS.....BUT I NEED TO KNOW THE LIMIT OF A LOW COMP D15....HONESTLY....

WTF?
Around 185 or so you will start snapping the thins rods of a d15.

samson 05-20-2007 05:37 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Ahhhhh, w0rd. Thanks man. :thumbup:


JP

HondaTuner 05-20-2007 05:39 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Slo, don't help the faggot noob, kthx.

Slo_crx1 05-20-2007 05:44 PM
Re: HOW MUCH BOOST CAN I RUN?
 
Originally Posted by bensbaby
the bore is 75mm

d15 and d16 75mm

the d16 rod is 3mm longer than the d15....

the d15 has flat pistons....

the d16y8 has dished pistons....

i end up with a 8-1 d15 ......i am sooo smart....lol
What...you think you're the first person to do this? LOL ---- man, I was doing d-series piston swaps when you were still wetting your bed :P
Originally Posted by bensbaby
i know that the stock comp on a 6 bolt eclipse is 7.8-1 with cast pistons and forged rods...stock....

450 hp safe if properly tuned.

i was tryn to have a safe conservitive setup for the street.....

less comp...more timing and more boost and more fuel....
Correct. Less compression will allow much greater boost pressures with an advanced timing curve, but only up to a point. D-series motors are picky with timing, and they don't tend to like a great amount of it.

DOHCD15 05-20-2007 05:59 PM
Re: HOW MUCH BOOST CAN I RUN?
 
WHY IN THE ---- DO YOU TYPE SO DAMN RETARDED.

ya use okkkkkk and ahahahaha and hahahahaha
Originally Posted by bensbaby
pffffffffffffffffffffffff

hahahhahaha
ahahahhahahahahahahahahaha
ahahahhahahaahahahahah
ahahahahahahahahaha
ahahahahahahahhahahahahahahahahahahaha
okkkkkkkkkkkkkkkkkkkkkkk


stop .....i shut u down...now stop
youve been typing like that all over this site and it's verrrrrryyyyyyy fuuuuccckkkinin rettttaaaaarded. in my opinion you are the most retarded person i've seen on the net and it gets pretty retarded on the net. go to hell noob >:D, oh wait your from canadia.

DOHCD15 05-20-2007 06:02 PM
Re: HOW MUCH BOOST CAN I RUN?
 
and are you a chick or a fag "bensbaby" i think fag!

DOHCD15 05-20-2007 06:19 PM
Re: HOW MUCH BOOST CAN I RUN?
 
then why are you called bensbaby unless you transexual GF is named ben?


All times are GMT -5. The time now is 08:03 AM.
Page 4 of 8
1
2
3
4
5
6
7
8
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands