How do I control Boost level on an internal wastegated turbo?

Reply Subscribe

Thread Tools

Search this Thread

Feb 12, 2004 | 02:51 PM

hanknmorgan

Thread Starter

0.5 BAR

Joined: Jan 2004

Posts: 93

How do I control Boost level on an internal wastegated turbo?

How does this work. WIth external I guess you get an adjustable wastegate, but how to you change the one built into the turbo.

Feb 12, 2004 | 02:59 PM

Reddy

0.0 BAR

Joined: Jun 2003

Posts: 0

Re:How do I control Boost level on an internal wastegated turbo?

With a hammer to the actuator rod or a boost controller

Feb 12, 2004 | 03:03 PM

hanknmorgan

Thread Starter

0.5 BAR

Joined: Jan 2004

Posts: 93

Re:How do I control Boost level on an internal wastegated turbo?

so a mbc is a needed component for a diy system. Which brand is good and cheap for these

Feb 12, 2004 | 03:04 PM

Reddy

0.0 BAR

Joined: Jun 2003

Posts: 0

Re:How do I control Boost level on an internal wastegated turbo?

no wastegates/actuators set boost to a perdetermined level usually 8psi. To raise it over that mark you need a boost controller

Feb 12, 2004 | 03:13 PM

hanknmorgan

Thread Starter

0.5 BAR

Joined: Jan 2004

Posts: 93

Re:How do I control Boost level on an internal wastegated turbo?

ok. That makes sense, are most of them 8 psi or do they vary depending on the turbo used?

Feb 12, 2004 | 03:17 PM

Reddy

0.0 BAR

Joined: Jun 2003

Posts: 0

Re:How do I control Boost level on an internal wastegated turbo?

vary with each turbo

Feb 16, 2004 | 11:21 PM

untouchableD16

0.0 BAR

Joined: Feb 2004

Posts: 1

Re:How do I control Boost level on an internal wastegated turbo?

Ok well howdo you lower the boost??

Feb 16, 2004 | 11:59 PM

Ravage70

3.0 BAR

Joined: Jan 2004

Posts: 5,933

Re:How do I control Boost level on an internal wastegated turbo?

make a hole in it

Feb 17, 2004 | 12:51 AM

Elite CRX

0.5 BAR

Joined: Jan 2003

Posts: 172

Re:How do I control Boost level on an internal wastegated turbo?

link to a DIY MBC: http://www.geocities.com/chmwatson/FAQs/mbc.html

Feb 17, 2004 | 01:00 AM

#10

krazeteggie

0.0 BAR

Joined: Oct 2003

Posts: 23

Re:How do I control Boost level on an internal wastegated turbo?

Quote:

Originally Posted by Whitey

With a hammer to the actuator rod or a boost controller

bend the rod makes it shorter and lowers boost. drop a boost controller in there if you want to raise it.

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 2
Next
Last