How do I control Boost level on an internal wastegated turbo?
How does this work. WIth external I guess you get an adjustable wastegate, but how to you change the one built into the turbo.
|
Re:How do I control Boost level on an internal wastegated turbo?
With a hammer to the actuator rod or a boost controller
|
Re:How do I control Boost level on an internal wastegated turbo?
so a mbc is a needed component for a diy system. Which brand is good and cheap for these
|
Re:How do I control Boost level on an internal wastegated turbo?
no wastegates/actuators set boost to a perdetermined level usually 8psi. To raise it over that mark you need a boost controller
|
Re:How do I control Boost level on an internal wastegated turbo?
ok. That makes sense, are most of them 8 psi or do they vary depending on the turbo used?
|
Re:How do I control Boost level on an internal wastegated turbo?
vary with each turbo
|
Re:How do I control Boost level on an internal wastegated turbo?
Ok well howdo you lower the boost??
|
Re:How do I control Boost level on an internal wastegated turbo?
make a hole in it ;)
|
Re:How do I control Boost level on an internal wastegated turbo?
link to a DIY MBC: http://www.geocities.com/chmwatson/FAQs/mbc.html
|
Re:How do I control Boost level on an internal wastegated turbo?
Originally Posted by Whitey
With a hammer to the actuator rod or a boost controller
|
All times are GMT -5. The time now is 03:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands