i know i can go with the typical cast manifold, but i don't have $350+ to fork over for it.

are there any "budget" manifolds in the $200 range with t3 flange?

i've heard of using the HF manifold and porting the hell out of it and using an adaptor plate.... that sounds even too ghetto for me

 

the HF manifold wont work on a B-series motor. if you want a cheap B-series manifold you will have to buy the flanges and make it your self (or know someone that will weld for hella cheap)...

 

check ebay, or even honda-tech for a low-budget B-series manifold, should be about 225 or so with a T3 flange and external gate.

Jeff

 

waite till you see the one im makeing jeff. its going to be dam nice.

Beau

 

some guy on ebays been selling them, short runner with external wastegate flange. prices weren't that bad either. it was like this one http://cgi.ebay.com/ebaymotors/ws/eB...tem=1875085348 but it was for b series. heres an option for you http://cgi.ebay.com/ws/eBayISAPI.dll...tem=2900838237 just search around on ebay

 

that first one is what im running but for a b series i think jeff can still buy manifolds from him at a decent price.

Beau