HomemadeTurbo - DIY Turbo Forum
Page 4 of 5
1
2
3
4
5
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   holset turbos anyone? (https://www.homemadeturbo.com/forced-induction-7/holset-turbos-anyone-72347/)

AJxr 01-09-2007 10:47 PM
Re: holset turbos anyone?
 
edit: i re-read and i assume you mean aftermarket rods and pistons, yeah idk still think the holset will set ya good.

btw i did say it would max out the power you can do with a STOCK f22

Tom-Guy 01-09-2007 11:29 PM
Re: holset turbos anyone?
 
Originally Posted by AJxr
of course the amount of boost matters on an engine
No it doesn't. Intake pressure means very little beyond port flow dynamics.

-SKUM- 01-10-2007 12:59 AM
Re: holset turbos anyone?
 
here is a map that I found
I have no idea what size housing they have though

http://i64.photobucket.com/albums/h1...-/untitled.jpg

I picked up a H1C with a 12cm housing for $75, Im gona put it on a friends 99 3.8 v6 camaro. Gona push about 8lbs. It should get up and go prety good. I know that finding a clutch that will hold the power is gona be the hardest part.

Tom-Guy 01-10-2007 04:36 AM
Re: holset turbos anyone?
 
Originally Posted by junkyard racer
I didnt read all of the pages of that thread. I started at page 50 and went on to my last post. Havent seen it, or havent paid much attention to it. Imma look though...
25-42 were the most informative, for some reason ~35 rings bells I think I was active in there about then. I haven't checked it in over a year and a half, I'd guess.

SkunT 01-10-2007 06:52 AM
Re: holset turbos anyone?
 
usually on those huge ass threads I start at about 10 pages from where it ended. 99% of the posts are "subcribed" when the only thing the bastards have to do is click subscribe. ::)

SO anyways, yeah, I see absoutly no reason not to get one. Cheap and make power. I could spend the same amount of $$ and get 1/ 2the turbo elsewhere. Looking forward to the build.


And ohh yeah, suspossed to race this bastard this weekend. Hes running a RB25 (STOCK) in a R32 GTS-t. Im gonna put him on the ole roteserie. :6 :y
I hope like hell someone brings a video camera.

BigWheeze 01-11-2007 04:14 PM
Re: holset turbos anyone?
 
Originally Posted by gen4acclude
im guessing spool time, really laggy
Yes, I had an HX35(4.5) and laged like hell on a 5.9L I6 Cummins. The GT60 Stage 3 we had laying around spools much faster(3.5K).

SkunT 01-11-2007 09:51 PM
Re: holset turbos anyone?
 
4K at full boost isnt laggy. expecially when you have a 8000rpms rev limit.

Tom-Guy 01-12-2007 12:50 AM
Re: holset turbos anyone?
 
Originally Posted by junkyard racer
4K at full boost isnt laggy. expecially when you have a 8000rpms rev limit.
leed summed it up best; they spool perfectly on stock 1.8 GSR and LS/VTEC. Joey agrees. :y

SkunT 01-12-2007 08:51 AM
Re: holset turbos anyone?
 
Sweet, I will soon find out. :y

dcivic 01-12-2007 10:35 AM
Re: holset turbos anyone?
 
you guys think a holset would be good on a d16y8 for project build? Also anyone have any experience w/ D Series Rev Hard turbo mani?


All times are GMT -5. The time now is 01:41 AM.
Page 4 of 5
1
2
3
4
5
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands