holset hx35 fittings - standard t3?
will the hx35 use standard t3 feed/drain fittings and flanges ? :7
|
Re: holset hx35 fittings - standard t3?
Drain flange is the same, inlet is a metric thread though. I got mine from Hahne, but a 14b might be the same.
|
Re: holset hx35 fittings - standard t3?
do people usually run a restrictor on these when they put them on cars? google is giving me mixed answers
|
Re: holset hx35 fittings - standard t3?
I didn't.
Standard T3 drain, I think the feed is JIC/AN but I have no idea what adapter I'm running anymore. Bring it to a hydraulic shop and they can hook you up. |
Re: holset hx35 fittings - standard t3?
pretty sure its m12x1.5 too bad mcmaster doesnt seem to carry a m12x1.5 male 1/8 npt female i have to order one of those seprate
|
Re: holset hx35 fittings - standard t3?
Originally Posted by WTF
pretty sure its m12x1.5 too bad mcmaster doesnt seem to carry a m12x1.5 male 1/8 npt female i have to order one of those seprate
|
Re: holset hx35 fittings - standard t3?
I used a class 8.8 12x1.5 hex-head bolt... chucked it up in the lathe, drilled a hole down the center, drilled a bigger hole in the head, tapped to 1/8NPT, put an o-ring under the head of the bolt, and tightened it down. Doesn't leak. O0
Colin |
Re: holset hx35 fittings - standard t3?
well i dont have fancy lathes or drill bits that can drill through a 8.8 bolt O0 so i just bought one for 15 shipped. problem is mine has like a 14mm hole for the oil inlet, or theres a fitting threaded in that was painted on
|
Re: holset hx35 fittings - standard t3?
1 Attachment(s)
is this a normal part of the center section or is this a stock fitting? i cant tell it looks like its part of the center but theres paint on it. its 14mm and everywhere ive read says there supposed to use a 12mm fitting
Attachment 19556 |
Re: holset hx35 fittings - standard t3?
off topic here, what cm housing did turbo come with ? |
All times are GMT -5. The time now is 11:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands