holset hx35 fittings - standard t3?
will the hx35 use standard t3 feed/drain fittings and flanges ? :7
|
Re: holset hx35 fittings - standard t3?
Drain flange is the same, inlet is a metric thread though. I got mine from Hahne, but a 14b might be the same.
|
Re: holset hx35 fittings - standard t3?
do people usually run a restrictor on these when they put them on cars? google is giving me mixed answers
|
Re: holset hx35 fittings - standard t3?
I didn't.
Standard T3 drain, I think the feed is JIC/AN but I have no idea what adapter I'm running anymore. Bring it to a hydraulic shop and they can hook you up. |
Re: holset hx35 fittings - standard t3?
pretty sure its m12x1.5 too bad mcmaster doesnt seem to carry a m12x1.5 male 1/8 npt female i have to order one of those seprate
|
Re: holset hx35 fittings - standard t3?
Originally Posted by WTF
pretty sure its m12x1.5 too bad mcmaster doesnt seem to carry a m12x1.5 male 1/8 npt female i have to order one of those seprate
|
Re: holset hx35 fittings - standard t3?
I used a class 8.8 12x1.5 hex-head bolt... chucked it up in the lathe, drilled a hole down the center, drilled a bigger hole in the head, tapped to 1/8NPT, put an o-ring under the head of the bolt, and tightened it down. Doesn't leak. O0
Colin |
Re: holset hx35 fittings - standard t3?
well i dont have fancy lathes or drill bits that can drill through a 8.8 bolt O0 so i just bought one for 15 shipped. problem is mine has like a 14mm hole for the oil inlet, or theres a fitting threaded in that was painted on
|
Re: holset hx35 fittings - standard t3?
1 Attachment(s)
is this a normal part of the center section or is this a stock fitting? i cant tell it looks like its part of the center but theres paint on it. its 14mm and everywhere ive read says there supposed to use a 12mm fitting
Attachment 19556 |
Re: holset hx35 fittings - standard t3?
off topic here, what cm housing did turbo come with ? |
Re: holset hx35 fittings - standard t3?
i paid the guy $100 for a 14cm non-wastegated 3" vband it had a 12cm internal wg
|
Re: holset hx35 fittings - standard t3?
1 Attachment(s)
Originally Posted by WTF
is this a normal part of the center section or is this a stock fitting? i cant tell it looks like its part of the center but theres paint on it. its 14mm and everywhere ive read says there supposed to use a 12mm fitting
Attachment 19553 |
Re: holset hx35 fittings - standard t3?
The feed is bpt (british pipe thread)...What size who knows I never got around to using my hx40 on my hatch before I sold it.
|
Re: holset hx35 fittings - standard t3?
Originally Posted by WTF
i paid the guy $100 for a 14cm non-wastegated 3" vband it had a 12cm internal wg
why did you do that ? isnt the 12cm housing like .89 a/r and the 14cm .97 a/r ? this is what i found on one of the sites; 6 cm2 = 0.41 A/R 7 cm2 = 0.49 A/R 8 cm2 = 0.57 A/R 9 cm2 = 0.65 A/R 10 cm2 = 0.73 A/R 11 cm2 = 0.81 A/R 12 cm2 = 0.89 A/R 14 cm2 = 0.97 A/R 15 cm2 = 1.05 A/R 16 cm2 = 1.13 A/R 17 cm2 = 1.29 A/R 19 cm2 = 1.37 A/R :-\ |
Re: holset hx35 fittings - standard t3?
why not? its for a 2.8L I6
|
Re: holset hx35 fittings - standard t3?
ah i see. i was thinking dinky 1.6-1.8L. :P
|
Re: holset hx35 fittings - standard t3?
Originally Posted by ef-man
The feed is bpt (british pipe thread)...What size who knows I never got around to using my hx40 on my hatch before I sold it.
and cheapo ebay t3 drain flange fits perfect |
Re: holset hx35 fittings - standard t3?
what have people used to connect charge pipes to the v band compressor outlet on holsets? grind it off? weld vband flange to charge pipe? i was going to try and find a stock piece from a cummins but havent found anything
|
Re: holset hx35 fittings - standard t3?
Grind most of it off but still leve a lip and use a coupler
|
All times are GMT -5. The time now is 10:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands