HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style (https://www.homemadeturbo.com/forced-induction-7/hmt-fuel-injector-cleaning-bitchass-getto-style-86640/)

klyph 12-08-2007 09:22 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 
What's with all the fags round here. Cleaning is for women. Way to get it done BAC :6

bitchasscracker 12-08-2007 10:18 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 

Originally Posted by klyph
What's with all the fags round here. Cleaning is for women. Way to get it done BAC :6


thank you good sir

KGParts 12-14-2007 04:32 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 
Holy ----...

I need to start subbing out my injectors to you for cleaning. O0

bitchasscracker 12-14-2007 07:04 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 

Originally Posted by Braineack
I sent mine there a few weeks ago. $17 an injectors plus $8 shipping.


yea that is what i will charge for my services



-SKUM- 12-14-2007 08:43 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 
here is how I clean my injectors.

1. Get a 3/8 vacume cap
2. Get a can of fuel injector cleaner
3. Get out your battery charger
4. Get a 2 pair of alligator clips with wire attached to them
5. Put a pin hole size slice into your vac cap
6. Put the straw from your fuel injector cleaner canin the hole about 1/8"
7. Put you straw onto your can
8. Put the vacume cap onto your fuel injector (the side that goes to the fuel rail)
9. Hook the clips up to the batt. charger
10. Now Grab someone to help you out with this part.
11. have someone spray the cleaner while you just tap the alligator clips on your injectors.


diy fuel injector cleaning
O0

KGParts 12-15-2007 09:38 AM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 

Originally Posted by ratcityrex
here is how I clean my injectors.

1. Get a 3/8 vacume cap
2. Get a can of fuel injector cleaner
3. Get out your battery charger
4. Get a 2 pair of alligator clips with wire attached to them
5. Put a pin hole size slice into your vac cap
6. Put the straw from your fuel injector cleaner canin the hole about 1/8"
7. Put you straw onto your can
8. Put the vacume cap onto your fuel injector (the side that goes to the fuel rail)
9. Hook the clips up to the batt. charger
10. Now Grab someone to help you out with this part.
11. have someone spray the cleaner while you just tap the alligator clips on your injectors.


diy fuel injector cleaning
O0

just curious as to how you are regulating the amps as to not cause more damage to the coil winding in the injector than you are doing good by running off the shelf cleaner through it? If the injector is filed with buildup, it will flow less of the off the shelf cleaner through it. How do you measure the flow before and after?

-SKUM- 12-15-2007 02:23 PM

Re: hmt fuel injector cleaning !!!!!!!!!!!!! bitchass getto style
 
well I just keep taping the wires to the injector and keep pumping the cleaner and you will most definatly see the spray pattern get much better after about 10 times of doing this. If it gets real bad I will hit it with injector cleaner and let them sit upright for a hour or two. And then I gp through all the steps I stated above.


All times are GMT -5. The time now is 03:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands