HM Internal Wastegate Brackets?
#11
Re:HM Internal Wastegate Brackets?
The way you have it will work fine. What you need to do is first use your adjustability and screw the arm so that it is at the longest setting or close to it. Mabye even holding the wastegate open a little. Then run the car and see what psi you get, it should be pretty low. Then come back and tighten it up one or two turns and run it again, this will raise the psi. Repeat this until you get your desired boost level or you hit the max. If you hit the max and can't get any more boost your going to need a boost controller.
Thread
Thread Starter
Forum
Replies
Last Post
djay86
Forced Induction
10
11-26-2005 03:56 PM