HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   HF Manifold, Evo III Big 16g Turbo, 300 WHP? (https://www.homemadeturbo.com/forced-induction-7/hf-manifold-evo-iii-big-16g-turbo-300-whp-71557/)

Tippyman 12-22-2006 11:02 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by Joseph Davis
Prove it.

That was a gross exageration, just to demonstrate a point.

Do you think that an HF mani w/ adapter plate would be able to flow enough to acheive 300 whp w/out having to stress the turbo? It ain't the biggest turbo in the world...

Tom-Guy 12-22-2006 11:08 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 
Firstly, I neither know nor care about the exact nature of the 16G turbo you are proposing to use. Small 16G, big 16G, the big 16G on the Evo8 that is apparently 400+ whp worth of turbo, etc, their common factor is that they are all Mitsufeces units and come bolted to slow heavy AWD fagmobiles and so I do not care.

Secondly, the HF manifold presenting itself as a restriction has zero to do with how hard the turbo labors.


Just pick a turbo that flows your desired power level worth of air, and crank the boost until you hit it. Welcome to turbo 101.

Tippyman 12-22-2006 11:17 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by Joseph Davis

Just pick a turbo that flows your desired power level worth of air, and crank the boost until you hit it. Welcome to turbo 101.

The turbo is a perfect match for my setup. I just didn't want to have to crank the boost up more than I had too. Keep as much stress off of the motor as possible.

Tom-Guy 12-22-2006 11:22 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 
Now you're afraid of making 301 whp. Are you a woman?

Scott-EP 12-23-2006 08:37 AM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by Joseph Davis
Yeah, well, it's just a warning screen. Honduhs don't lose floorboards like DSMs. :1

thats good. i have been getting that screen lately since i raised the boost. im glad my floor wont fall off.

noboostedEGo 12-23-2006 11:32 AM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by Joseph Davis
Why the ---- does having to run more boost equal a bad thing in your mind?

he could blow the welds on his intake

drunkinmaster1 12-23-2006 12:23 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by noboostedEGo
he could blow the welds on his intake

i hope your kidding :1

and as far as a 16g goes. if you plan on using any 16g between the evo 4 through 8, it aint gonna happen on an hf manifold because all evo 4 through 8 16g turbos are duel scroll. therefore you will have to make a custom manifold the divides cylinders 1 and 4 from 2 and 3.

ichbinsobose 12-23-2006 12:36 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Originally Posted by drunkinmaster1
i hope your kidding :1

and as far as a 16g goes. if you plan on using any 16g between the evo 4 through 8, it aint gonna happen on an hf manifold because all evo 4 through 8 16g turbos are duel scroll. therefore you will have to make a custom manifold the divides cylinders 1 and 4 from 2 and 3.

now I hope YOU are kidding

drunkinmaster1 12-23-2006 12:45 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 
i missed it that it was an evo 3. but yes all evo 4 through 8 are duel scroll

blowing the welds on the intake at 20 psi? :1

92turbohatch 12-23-2006 12:49 PM

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 
It was a joke,The five other dsm fast and the furious references went over your head or you missed them.


All times are GMT -5. The time now is 09:12 AM.


© 2024 MH Sub I, LLC dba Internet Brands