HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Like the title says, i'm going to try to do 300 HP on my built D16A6 next summer. Is this conceivable with the HF mani?

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

20+psi, then your pushing the turbo to the limits

Id upgrade turbos

t3/t04e 57 trim

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

I have three things to tell to.

1.YOUR GAY
2.POST PORN
3.READ FIRST YOU ------- NOOB!!!

ps.POST PORN OR DIE!!! ;)

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

I tried to search, but it isn't working. It just keeps going to a blank screen.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

haha tippyman. read the rules nog.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

use google and type in what you want to search and then add site:homemadeturbo.com to the end of it.

ex. My setup site:homemadeturbo.com

now post porn. ;)

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Odd, I thought I was the only one getting this problem.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

What does your setup consist of? Do you have any other specific turbo parts in mind?

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Evo III Big 16g turbo, Arias pistons, Eagle rods, stock sleeves, 550's, turbo edit, etc.

After doing some research on H-T I think i'll be able to do it, but only with pushing the turbo to it's limits. I think I may have to pony up the extra cash and be nice to my motor.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

glad you finally got of the bottle.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

300WHP is definitely possible with the HF mani

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

X2

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

^^^^go back or post porn.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

We do all those noob that act like they've been here for years come from? Dude your a ------- noob fuckface. Hello Mr. OG I registered on July 13, 2006. ::)

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

But if I used it, I'd have to run alot more boost, right? I know I could do it, but I don't wanna have to run 20 lbs of boost just to get 300 hp.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Why the ---- does having to run more boost equal a bad thing in your mind?

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Because you will get the "danger to manifold" warning on your laptop. :S

I say build the kit you want and then see what you can get outta it. ---- planning. Just get a kit and then replace parts as needed.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Yeah, well, it's just a warning screen. Honduhs don't lose floorboards like DSMs. :1

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Well, If I can make 300 hp by running a "mini-pro mani" and 15 lbs of boost, or run 20 lbs of boost on an HF mani, i'd rather run the 15 lbs. It's alot easier on the motor.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Prove it.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

That was a gross exageration, just to demonstrate a point.

Do you think that an HF mani w/ adapter plate would be able to flow enough to acheive 300 whp w/out having to stress the turbo? It ain't the biggest turbo in the world...

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Firstly, I neither know nor care about the exact nature of the 16G turbo you are proposing to use. Small 16G, big 16G, the big 16G on the Evo8 that is apparently 400+ whp worth of turbo, etc, their common factor is that they are all Mitsufeces units and come bolted to slow heavy AWD fagmobiles and so I do not care.

Secondly, the HF manifold presenting itself as a restriction has zero to do with how hard the turbo labors.


Just pick a turbo that flows your desired power level worth of air, and crank the boost until you hit it. Welcome to turbo 101.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

The turbo is a perfect match for my setup. I just didn't want to have to crank the boost up more than I had too. Keep as much stress off of the motor as possible.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Now you're afraid of making 301 whp. Are you a woman?

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

thats good. i have been getting that screen lately since i raised the boost. im glad my floor wont fall off.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

he could blow the welds on his intake

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

i hope your kidding :1

and as far as a 16g goes. if you plan on using any 16g between the evo 4 through 8, it aint gonna happen on an hf manifold because all evo 4 through 8 16g turbos are duel scroll. therefore you will have to make a custom manifold the divides cylinders 1 and 4 from 2 and 3.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

now I hope YOU are kidding

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

i missed it that it was an evo 3. but yes all evo 4 through 8 are duel scroll

blowing the welds on the intake at 20 psi? :1

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

It was a joke,The five other dsm fast and the furious references went over your head or you missed them.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

never seen the movie

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

he goes too fast and his intake manifold was gonna blow up then his floorboard falls off :1 lollercaust

And to the originator of this post.. do you realize that 5 psi on one turbo could be the same flow as 15 psi on another, potentially exposing your turbo to the same "damage" taht you already fear >:D

Just do it, pansy.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

The only reason I wouldn't want to run more boost on my motor with a smaller turbo is the chance of detonation and diminishing returns as the boost goes up.

Pump gas typically isn't very friendly with small turbos and high boost.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

ran 16 psi on a b16 rex with a 48/52 t bird t3

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

No such turbo. Abort, retry, or fail?

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

ihi he means

you are a very big retard do you even know what dual scroll means ???


yes you can use it with a hf ignore this fag

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

16 psi on an IHI is balls, son.

You can run dual scroll like a normal turbo with unpaired cylinders.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

And this is how we know you bought 405 whp and didn't build it.

Re: HF Manifold, Evo III Big 16g Turbo, 300 WHP?
 

owned