Forced Induction Custom FI Setup Questions

Help! no boost to low boost only.......

Old 05-16-2003, 04:42 PM
  #1  
1.0 BAR
Thread Starter
 
Turboman's Avatar
 
Join Date: Dec 2002
Posts: 216
Default Help! no boost to low boost only.......

There was a thread on this already, but the guy that post it never post what his fix was......

I have no boost until it hits 3-5 gear and when it boost its only boosting 2-4psi, where normally boost 8-10 psi. I have check for leaks. Try different bov and boost gauge. I even try a different boost gauge line just to make sure the line is not pinch. I was using a manual boost controller and have eliminate it to see if that was the problem, but it's not........I can hear the turbo spins and the BOV blows loud. ...
Is it possible for the wastegate to go bad?

1990 CRX D16A6
IHI Turbo

http://home.earthlink.net/~freemanmoua
Turboman is offline  
Old 05-17-2003, 03:41 AM
  #2  
JD
1.5 BAR
 
JD's Avatar
 
Join Date: Mar 2003
Posts: 811
Default Re:Help! no boost to low boost only.......

The wastegate could be it but its doubtful. Make sure to check all the pipe connectors. Small cracks can be very hard to see and may only expand when under pressure. This happened to me and I had the exact same symptoms as you do and it was caused by a small centimeter crack on the bottom side of one of my couplings.
JD is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sgoertz
Turbo Parts For Sale
6
01-06-2006 10:21 AM
zlthomps
Forced Induction
7
08-04-2004 04:51 PM
jake2001z001
General Discussion
20
04-08-2004 03:47 AM
bambooseven
Turbo Parts For Sale
30
01-15-2004 01:24 PM
Turboman
Forced Induction
8
05-29-2003 04:08 PM


Thread Tools
Search this Thread
Quick Reply: Help! no boost to low boost only.......



All times are GMT -5. The time now is 06:23 PM.