HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Help! no boost to low boost only....... (https://www.homemadeturbo.com/forced-induction-7/help-no-boost-low-boost-only-5080/)

Turboman 05-16-2003 04:42 PM

Help! no boost to low boost only.......
 
There was a thread on this already, but the guy that post it never post what his fix was......

I have no boost until it hits 3-5 gear and when it boost its only boosting 2-4psi, where normally boost 8-10 psi. I have check for leaks. Try different bov and boost gauge. I even try a different boost gauge line just to make sure the line is not pinch. I was using a manual boost controller and have eliminate it to see if that was the problem, but it's not........I can hear the turbo spins and the BOV blows loud. ...
Is it possible for the wastegate to go bad? ??? :-\

1990 CRX D16A6
IHI Turbo

http://home.earthlink.net/~freemanmoua

JD 05-17-2003 03:41 AM

Re:Help! no boost to low boost only.......
 
The wastegate could be it but its doubtful. Make sure to check all the pipe connectors. Small cracks can be very hard to see and may only expand when under pressure. This happened to me and I had the exact same symptoms as you do and it was caused by a small centimeter crack on the bottom side of one of my couplings.


All times are GMT -5. The time now is 10:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands