Forced Induction Custom FI Setup Questions

hearing the bov at 10Hg?

Old Apr 6, 2004 | 08:46 AM
  #1  
Stan's Avatar
Thread Starter
1.5 BAR
 
Joined: Aug 2003
Posts: 1,341
Default hearing the bov at 10Hg?

I'm hearing my blow off valve going off when I let off. According to the boost gauge it's going off at 10Hg. Is my gauge fucked, or maybe is it the nylon line?

Stan
Old Apr 6, 2004 | 08:59 AM
  #2  
projekteg's Avatar
3.0 BAR
 
Joined: Apr 2003
Posts: 11,056
Default Re:hearing the bov at 10Hg?

it was a brand new gauge, i doubt it's fucked, vdo, might be ugly, but they're pretty good. how is your line ran? pull it and check for kinks, or just replace it with regular vacuum hose, you could also have a vacuum leak some where affecting your readings
Old Apr 7, 2004 | 02:14 AM
  #3  
scarecrowX's Avatar
0.5 BAR
 
Joined: Apr 2003
Posts: 188
Default Re:hearing the bov at 10Hg?

there can be boost in the charge pipes even if there's vacuum in the manifold. the throttle butterfly is a restrictor, thus pressure on the turbo side when only partially open WILL be higher than pressure on intake valve side. this is very common with small turbos where partial throttle is enough to spool them.
Old Apr 7, 2004 | 12:03 PM
  #4  
Stan's Avatar
Thread Starter
1.5 BAR
 
Joined: Aug 2003
Posts: 1,341
Default Re:hearing the bov at 10Hg?

Ahh, that makes sense. But even at 10InHg with a .60/.63 t3?

Stan
Old Apr 7, 2004 | 10:31 PM
  #6  
thompson's Avatar
0.5 BAR
 
Joined: Apr 2004
Posts: 65
Default Re:hearing the bov at 10Hg?

i hear mine a little when in close to 10hg.. under a small load too (about 35-40% throttle) if i let off of it i hear it a little bit
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yungtuner
Hybrid/Tech
2
Sep 22, 2003 02:38 AM
2000psi
Turbo Parts For Sale
26
Jul 11, 2003 04:59 PM
gotboost
Forced Induction
6
Mar 2, 2003 02:24 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:12 PM.