H23 turbo kit
06-03-2008, 12:27 AM
#23
1.5 BAR
Join Date: Jul 2005
Posts: 1,205
Re: H23 turbo kit
https://www.homemadeturbo.com/forum/...?topic=28135.0
there is no point in 4psi
read up on that post and start buying parts
there is no point in 4psi
read up on that post and start buying parts
06-04-2008, 11:23 AM
#25
1.0 BAR
Join Date: Nov 2006
Location: Orlando, FL
Posts: 283
Re: H23 turbo kit
i think the 14b is too small for the h23. I wouldn't say 4psi is completely worthless, it would be some horsepower(actually torque) added but it is vagina status as far as everyone on HMT is concerned. It'll pull nice down low if you can eeven stabilize boost at 4psi with an internal wastegate.
After all the install....ur biggest issue is gonna be detonation so you'll need a decent tune......and the H-series pistons are weak around the ring lands. So a not so great tune could ---- something up in no time.
Good luck.
U need a manifold that will mate the turbo of ur choice...unless you can fab up some kind of adapter plate. Read up on, all the info is here and its not too difficult, and its do-able. Don't be a nig nog about it.
Why don't you just look around on DSM forums and get a DSM set up and drill the hole in the manifold flange
Cheap and easy
After all the install....ur biggest issue is gonna be detonation so you'll need a decent tune......and the H-series pistons are weak around the ring lands. So a not so great tune could ---- something up in no time.
Good luck.
U need a manifold that will mate the turbo of ur choice...unless you can fab up some kind of adapter plate. Read up on, all the info is here and its not too difficult, and its do-able. Don't be a nig nog about it.
Why don't you just look around on DSM forums and get a DSM set up and drill the hole in the manifold flange
Cheap and easy
06-04-2008, 02:56 PM
#26
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: H23 turbo kit
14b is a joke on anything but a sohc d-series. Buy BDV mani. 4psi is a joke those h23 can take a ---- ton more then that. Dsm 450's will limit you to around 300hp, I think that will be enough for you. You will need to have a ecu chipped, Xenocron is your man for that. Your also going to need a clutch and fuel pump, once again Xenocron is you man. Now go to all the stickies and read, read, and READ!!!
06-04-2008, 06:07 PM
#28
0.5 BAR
Join Date: Jan 2008
Posts: 118
Re: H23 turbo kit
I'm beatin on my h22 at@ 8 psi daily stock intrenals no vtec and just an fmu. It runs rich sometimes. I bump it up to @ 14 psi once in a while. It's still holding up.
Just ordered Crome pro from Xeno last week.a nice combo with wideband and all. I'll be the first one here on Aruba running Crome. Everybody here is using microtec. I hate being like everybody else.
Just ordered Crome pro from Xeno last week.a nice combo with wideband and all. I'll be the first one here on Aruba running Crome. Everybody here is using microtec. I hate being like everybody else.
06-07-2008, 02:14 AM
#29
0.0 BAR
Join Date: Mar 2007
Posts: 13
Re: H23 turbo kit
14b is too small for H23 get a 16g with stock wastegate and chipped ecu and have fun. just do a compression test first not really a strain on the motor even with the 14b it wont be a strain but search and you'll find
06-07-2008, 03:19 AM
#30
0.5 BAR
Join Date: Jun 2007
Posts: 185
Re: H23 turbo kit
I wouldn't even run 4 psi on my d16. F-that. Dude if you wanna gain 30 horses for $600 buy a header, cam, intake, and exhaust. If you grow some ***** boost that bitch to AT LEAST 10 psi. Come on man. I am gonna run more than 4 psi on my y7. come on.
