Greddy Turbos (bolt patterns) Downpipes/Turbos ?
03-18-2004, 05:54 PM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Greddy Turbos (bolt patterns) Downpipes/Turbos ?
Does anyone know where I might be able to find a new 3" Downpipe using the Greddy Civic EX turbo bolt pattern?
Or how about finding new, larger turbos that bolt up to the Greddy manifold?
And I better not be getting ---- for using a greddy kit this thing has kicked *** and I only paid $500 for it
It would be nice to run full 3" exhaust from the turbo back, but I don't want to have my own down pipe made (seems like to much a hassle) and I would also like to get a larger turbo... but without having to redo a ------- manifold and all that go od ole ----.
Or how about finding new, larger turbos that bolt up to the Greddy manifold?
And I better not be getting ---- for using a greddy kit this thing has kicked *** and I only paid $500 for it
It would be nice to run full 3" exhaust from the turbo back, but I don't want to have my own down pipe made (seems like to much a hassle) and I would also like to get a larger turbo... but without having to redo a ------- manifold and all that go od ole ----.
03-18-2004, 06:02 PM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
The greddy kit uses the JDM T25 exhaust flange, so some turbos you could upgrade from the small TD04 would be the TD05-18g that comes on the integra kit. Or a Silva Garrett T28 hybrid
As far as a downpipe, definatly just locate a flange, and buy some mandrel bent 3in piping and go to town.
Jeff
As far as a downpipe, definatly just locate a flange, and buy some mandrel bent 3in piping and go to town.
Jeff
03-18-2004, 06:05 PM
#3
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
How good at the T28 hybrids? I mean whats like maximum produceable power out of them?
This little TD04GH15G or whatever maxes out at about 15 psi and I think with 2" piping I'm driving the turbo to hard. I'm looking to run 10 psi constantly, but would like to spool quick and not have creep.
This little TD04GH15G or whatever maxes out at about 15 psi and I think with 2" piping I'm driving the turbo to hard. I'm looking to run 10 psi constantly, but would like to spool quick and not have creep.
03-18-2004, 06:08 PM
#4
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
There ok, better than the td04's.. See if you can get your hands on a TD05 15g from the greddy kit, thoes turbos are pretty big, pretty compareable to a T3/T40e .57trim..
So 10psi would be no problem
Jeff
So 10psi would be no problem
Jeff
03-18-2004, 07:35 PM
#8
1.5 BAR
Thread Starter
Join Date: Dec 2002
Posts: 1,495
Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
So you think a T04B turbocharger will fit my bolt patterns? I can get a new downpipe made, but it would be easy as hell to stick with the current exhaust manifold.
03-18-2004, 07:57 PM
#9
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
Originally Posted by Chacko
So you think a T04B turbocharger will fit my bolt patterns? I can get a new downpipe made, but it would be easy as hell to stick with the current exhaust manifold.
