Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

Does anyone know where I might be able to find a new 3" Downpipe using the Greddy Civic EX turbo bolt pattern?

Or how about finding new, larger turbos that bolt up to the Greddy manifold?

And I better not be getting ---- for using a greddy kit this thing has kicked ass and I only paid $500 for it :)

It would be nice to run full 3" exhaust from the turbo back, but I don't want to have my own down pipe made (seems like to much a hassle) and I would also like to get a larger turbo... but without having to redo a ------- manifold and all that go od ole ----.

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

The greddy kit uses the JDM T25 exhaust flange, so some turbos you could upgrade from the small TD04 would be the TD05-18g that comes on the integra kit. Or a Silva Garrett T28 hybrid

http://www.mjmturbos.com/images/T28T04Bhybrid.jpg

As far as a downpipe, definatly just locate a flange, and buy some mandrel bent 3in piping and go to town.

Jeff

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

How good at the T28 hybrids? I mean whats like maximum produceable power out of them?

This little TD04GH15G or whatever maxes out at about 15 psi and I think with 2" piping I'm driving the turbo to hard. I'm looking to run 10 psi constantly, but would like to spool quick and not have creep.

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

There ok, better than the td04's.. See if you can get your hands on a TD05 15g from the greddy kit, thoes turbos are pretty big, pretty compareable to a T3/T40e .57trim..

So 10psi would be no problem

Jeff

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

got a recommended site to shop from?

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

nah, just keep your eyes out.. I've seen some go on honda-tech. A few locally

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

damnt ---- fuckerinfasjdflkajsdlk;1u2uy qpeokfj;lkdsjf just kidding ;)

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

So you think a T04B turbocharger will fit my bolt patterns? I can get a new downpipe made, but it would be easy as hell to stick with the current exhaust manifold.

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

A t04b? no.. that would use a T3 flange if it was a hybrid or a T4 flange if it was a straight T4. ???

Re:Greddy Turbos (bolt patterns) Downpipes/Turbos ?
 

okay well what exactly am I searching for? Cause I'm trying to find a new turbo tonight :)

TD05s seem to be impossible to get without buying the entire kit.