Greddy 18g users need your help.

Reply Subscribe

Thread Tools

Search this Thread

11-09-2005, 11:43 PM

ghostsi

1.0 BAR

Thread Starter

Join Date: Mar 2005

Posts: 384

Greddy 18g users need your help.

Well my car got a fresh set of CP pistons and now i have found out my oil feed/return lines are "homo" What would you guys recommend as in relpacing them? i was looking at tuner toys and there stealthmode oil kits but not sure about there sizes. Any help there? I have the greddy 18g turbo but my return line is just a tube with some Clamps.

TIA

11-10-2005, 02:54 AM

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re: Greddy 18g users need your help.

I'd go with a -3 an feed line, and just some re-routing of your return line should cure the problem. I think the 2 inches I cut off of it already should help it out.

11-10-2005, 10:47 AM

LateApex

0.0 BAR

Join Date: Mar 2005

Posts: 41

Re: Greddy 18g users need your help.

I got my original lines from Stan @ Fast-Turbo. Then the feed line failed during a race (stupid POS Goodridge) now I have a Stealthmode kit on there and it is holding up great, plus the firewall T rocks.