HomemadeTurbo - DIY Turbo Forum - Greddy 18g users need your help.

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Greddy 18g users need your help. (https://www.homemadeturbo.com/forced-induction-7/greddy-18g-users-need-your-help-49776/)

ghostsi

11-09-2005 11:43 PM

Greddy 18g users need your help.

Well my car got a fresh set of CP pistons and now i have found out my oil feed/return lines are "homo" What would you guys recommend as in relpacing them? i was looking at tuner toys and there stealthmode oil kits but not sure about there sizes. Any help there? I have the greddy 18g turbo but my return line is just a tube with some Clamps.

TIA

HMT-Admin

11-10-2005 02:54 AM

Re: Greddy 18g users need your help.

I'd go with a -3 an feed line, and just some re-routing of your return line should cure the problem. I think the 2 inches I cut off of it already should help it out.

LateApex

11-10-2005 10:47 AM

Re: Greddy 18g users need your help.

I got my original lines from Stan @ Fast-Turbo. Then the feed line failed during a race (stupid POS Goodridge) now I have a Stealthmode kit on there and it is holding up great, plus the firewall T rocks.

All times are GMT -5. The time now is 02:49 PM.