d16u7nh

I know where the oil out and the oil in are. But there are two other holes that are threaded and look like they mean business. What are they? Also this turbo has a wastegate i belive(Thats what the thing hanging of the turbo is right) but my question is there's a little nipple off the wastegate for some sort of hose, what hose is that? Thanks guys!

NINJA del Sol

I believe that's the hose that puts pressure into the wastegate actuator; this would also be the place to hook-up a boost controler controller-however the hell you spell that.

ONIN

you are correct about the wastegate thing....

can you please help us help you by telling us what kind of turbo you have?

d16u7nh

It's a M10 airesearch. i was told that it's a t3.

tranceminister

The other 2 holes your talking about are for water/coolant. It's an oil and water cooled turbo, but if you only want to run oil to the turbo you can block off the coolant holes with threaded plugs. I have the same setup.

d16u7nh

how do i get water and coolent to the turbo? if i choose to cap the holes off with this harm the turbo.

anothercivcSi

just use find the line feeding coolant into the bottom of the throttle body..replace that line with a much longer one and feed it into the turbo..then have the return line feed into the throttle body. easy as that.

d16u7nh

sounds good. did not know there was a line of coolant below the throttle body.