M I N I O N

I use nitrous jets.

SpankedYA!

Nitrous jet is the same thing.

SpankedYA!

They make bushings for just about every thread combo. Then you can just use this one with a bushing.

Jeremy, I'm gonna run this at the turbo as well. Thats where it should be run from what I read.

Loserkidwac

Good find, I ran stealths on my last kit rock steady and plan on running it on my next one, I also use his firewall kit for mounting it. mounted it before the "T" and tyhe mounted my guage and turbo feed on the the other end of the "T" so I can monitor the pressure

rottz

Well, this is mine restrictor... Our local hydrolic shop sell those things for a lousy 10 euros... (about $11) You can set it from 1 PSI till full and it works great!! Some pics:

extensioncordy

what do the oil restrictors do? is it bad to have 80psi going to your turbo? and has anyone bought a brass fitting from autozone for a oil feed line?

Ravage70

80 psi will own your turbo

91efate

thats where i tried putting it, the male end goes in the center section but the female end will not accept my line, looks like i have to shell out $15 for another little brass adapter.

SpankedYA!

Thats because you also have to use the -3an to 1/8 adapter that came with your oil line kit. (If its a Stevemode kit, and it should be! It will be in there.)

91efate

nope, its not. i ordered the kit almost 1yr ago and im just now opening it. i only wound up using the feed not the drain. but no its not there. can i order just that piece off the website?